Jump to content
SAU Community

Complete S15 Shell, Set Up For Rb, Can Setup For Sr

STATUS
 Share

Recommended Posts

STATUS Grand Master

STATUS

Posted
Posted (edited)

This was going to be our next drift car but something else has come up (secret) so we are offering this for sale.

i should mention this is a complete car minus headlights and has VERY VERY slight front left damage (few 100 bucks), minus engine and trans BUT the interior is complete and undamaged front seats removed and stored safely.

We can supply it as is or we can complete it to any stage you may require. ATM it has bulletproof full R34 GTR rear end (diff, cradle, suspension etc) R34 gtt front crossmember and rack. We are happy to swap front end out if someone to refit SR, we have a few SR20 (jap s15) engines here so we can install it as supply it as a full runner.

Car also has genuine yashio factory front guards and is auto, can supply manual parts if need be.

$6k ono pics up soon

ps can also supply the RB26 that was destined for it..... or we can complete the car to track spec if so be it.

post-34927-1224807591_thumb.jpg

post-34927-1224807596_thumb.jpg

post-34927-1224807604_thumb.jpg

post-34927-1224807611_thumb.jpg

post-34927-1224807616_thumb.jpg

post-34927-1224807625_thumb.jpg

post-34927-1224807745_thumb.jpg

Edited by URAS
STATUS Grand Master

STATUS

Posted
  • Author
Posted (edited)
selling the engine as well???

yeah, full built RB26. (unstarted)

R33 N1 crank new

greddy pro cams

greddy springs

reco head (all new valves etc)

greddy pistons

H beam rods

greddy oil pump

greddy cam gears etc

plus all the usual things, extra drain, oil restrictors etc

complete engine minus bolt ons. $9k

Edited by URAS
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • MBS206
      Starter motor replacment teeth count.

      By MBS206 · Posted

      I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...