Jump to content
SAU Community

Recommended Posts

He's right it does work at low speeds. I think its called opposite phase or somethin at low speeds. It turns the wheels the opposite direction to the front wheels at low speeds. and at high speeds in turns them in the same direction as the front wheels.

Or if you don't enjoy unexpectedly being wrapped around a pole if you can't help booting it around corners. :)

It's not that it 'has a mind of its own' every time u boot it around corners. Sometimes it does it and you won't realise. But in my case when it swung me lane to lane, you obvs realise it and it becomes a hazard. I just got lucky, if it kept oversteering about 20cm more I woulda wound up over the box curb in the bushes. No point fitting it in after you crash it. Rather be safe than sorry imo.

Edited by Magic
it does work at low speeds because if i slow down for a turn and then gun it round the bend quickly it brings my back end round nicely, sometimes im not sure if it is the HICAS or me losing traction. i quite like it but then i have not had the car going hard round a track or a skid pan yet. am booked in to take it on the skid pan at AHG next month so i will have a better idea then and make my mind up wether i still like it.

That doesn't make sense.. HICAS would be working whether you gunned it or not (if it did in fact work at slow speed) and it wouldn't suddenly snap in when you apply the gas.. sudden dynamic steering changes mid corner upon application of accelerator? lolwut? do you have traction control on when doing this? Maybe it works differently on 34s? I'm still rather certain HICAS (at least in 32s) does nothing at low speed.

Found this, it pertains to HICAS in 240sx's.. can't be assed researching more right now.. so the question for now is: what is "moderate" speed?

Performance%20Tuning%20Systems%20HICAS%20explanation.jpg

Edited by bubba

Did some more research on it too and this website on the 240SX HICAS justifies mine, Ruckers and Steve's theory on it. And if it does this on the s13 it would no doubt have the same effect on 32s and above.

http://www.240edge.com/basics/super-hicas.html

Not sure how credible it is though. Would prefer to see pictures/info from Nissan itself.

I guess it doesn't really matter if it does/doesn't work at low speeds as its not really the issue. At the end of the day, lockbar is the go.

That image I posted above is from Nissan..

As for the speedo, it depends what has stopped working.. if it's the cable then no, HICAS won't work and neither will your speed sensitive steering. If the problem is after the cable (i.e. the speedo itself) then HICAS and speed sensitivy steering should still work (n.b. this only applies to S13/R32)

im having problems with my electric HICAS on my 33 ... it comes on after turning off the engine for a short while, im probably gonna

get a HICAS lockbar and lock the crap out of it !!!!! KYP in Wealshpool quote me 170 fitted .... is that an alright price ??

cheers

wtf? what makes you say HICAS is killing the engine?

that sounds pretty fkn strange..

no no .. nothing to do with killing the engine, just that when i drive around and i switch my car off for awhile ... when i come back and

switch the car back on the HICAS lights comes on and i lose the power steering.. LOL

Lol, thas kind of like mine atm.

I will be driving and the steering is a bit resistant then hicas light comes on and become some what hard to steer lol so

Im just getting the whole thing removed That way i save precious Kg's :D

It will all be fixed soon!!! ;)

ive teared it up @ ahg skid pan day and ive still got my hicas active. It didnt bother me too much tho. But then again it depends on what "high" speed and "moderate" speed is...

Top speed on a skid pan day if ur lucky is 100kmh.

Only to then slam the brakes and rip around the corner.

Booked in another one in dec... see how that one goes.

ive teared it up @ ahg skid pan day and ive still got my hicas active. It didnt bother me too much tho. But then again it depends on what "high" speed and "moderate" speed is...

Top speed on a skid pan day if ur lucky is 100kmh.

Only to then slam the brakes and rip around the corner.

Booked in another one in dec... see how that one goes.

you doing it on the 14th of December? im booked in to do it then.

you doing it on the 14th of December? im booked in to do it then.
Don't you mean the 13th Dec? or is this not the SAUWA day?

If you mean the 13th like bubba said, then yep i am booked in then. The arvo session tho..

If you mean the 13th like bubba said, then yep i am booked in then. The arvo session tho..

Nah sunday 14th not the SAUWA one. my parents got me it for my birthday. was ment to do it on the 16th of this month but coil packs went on me so had to move it to next month.

im having the same issues want to remove mine aswell,..to dangerous in the wet when sideways gets to unpredictable hicas gets confused..but i have a feeling that mine is affecting my powersteering as it gets really hard..almost like no powersteering at all..when car is just started in the morning the powersteering works fine but afta a while goes hard..has anyone else had this problem or could it be sum other electrical issues..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...