Jump to content
SAU Community

Recommended Posts

Hi guys,

I've got this problem where my refridgerant container keeps emptying out in about a week. I was just checking out the engine bay the other day and found the coolant container dry as a bone. Went out n bought some pre mixed stuff, and then filled it up. now it's almost gone again. There are no leaks or anything coming from the car, my driveway is spotless. Anybody know what could be happening?

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

if u cant see where the coolant is going u may have a cracked head and it goes to the exhaust manifold .have u r radiator cap pressure tested it may come out of there to the overflow and u dont see it cause it only does it while very hot .

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-523660
Share on other sites

I'm wondering - there is a hole in the top near the cap to let too much overflow out isn't there? Couldn't it just be evaporating out the hole over time? Mine seems to lose coolant over time too but whenever I check the radiator, it's always full to the brim.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524214
Share on other sites

I've got a hose from radiator to overflow bottle, but I think there's another hole which is square that doesn't go anywhere. I can't remember anymore, I'm going to have another check when I get home. Maybe I'm just deluded (or maybe the overflow hose is split or something).

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524222
Share on other sites

oh okay.....I got a black plastic (maybe 10mm) hose runnin from just below the rad cap (l/h/s) to the top of the o/flow bottle but I'm pretty sure there isn't another hole.......if there was how could the system keep pressure & once hot you'd see steam pissin out of the hole!

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524224
Share on other sites

Originally posted by RedLineGTR

Is the radiator low on fluid??

Check your oil. See if their is a milky colour within the oil.  

Is thier any smoke coming out the exhuast when the car is at normal operating temp.

This happened exactly same as me! filled the coolant bottle and next thing i noticed all gone! no leaks whatsoever. I even checked the radiator its all full. My car do smoke though during warmup but not normal operating temp.. is this normal?

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524375
Share on other sites

Yeah it's normal :)

I even think (not 100% sure) that when the engine is cold, the moisture in the air doesn't get hot enough to completely boil into invisible steam as it goes through the engine, as thus comes out as visible vapour.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524394
Share on other sites

SO its not just me that has issues with leaking coolant...

Trust me, there is no way a whole overflow bottle of coolant can evaporate even over quite a long period. If there is even a few centimetres difference in the level of the overflow bottle after u drive a few times, u have problem.

I changed my water pump, which fixed mine a bit. But then i discovered that small amounts are also coming from the head gasket area, so check this.

my head will be removed 2morrow to check where the leak is coming from...

Look around cylinder 6 for signs of leakage, because the metal is hot in that area coolant can leak out and evaporate without u noticing, but it leaves a stain.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524429
Share on other sites

guys , if u fill the bottle above the max mark u'll loose it very quick form the overflow on the bottle itself ( the bottle has an overlow ) .u should fill the radiator to the top and the bottle should be between the nin and max mark .

nrage33 if u loose coolant form the overflow u should be able to see it in the engine bay area .,

as for steam ( not smoke though ) coming out of the exhaust especialy when the outside temp is very cold thats normal in any car new or old until the cold exhaust pipes get to normal temp u 'll see plenty of steam clouds of it when very cold .once the ex pipe gets hot no more steam .

the hot exhaust air hits the cold pipe and u have steam , u'll notice when u start the engine the steam will start a few seconds after as soon as hot exhaust comes out the next couple of minutes more steam heaps more and then will start to lessen until it all goes .

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-525093
Share on other sites

Originally posted by siksII

Trust me, there is no way a whole overflow bottle of coolant can evaporate even over quite a long period. If there is even a few centimetres difference in the level of the overflow bottle after u drive a few times, u have problem.

I had another look and there is an extra square hole at the top like wrxhoon says. I reckon over a period of months (like mine has been) water could easily evaporate out that hole, because it gets pretty warm in there.

The thing is though, I don't know how easily coolant evaporates. So if you filled it up with coolant it's entirely possible that it would never evaporate no matter how hot your engine got. Unfortunately I don't have any spare coolant to put in the overflow bottle, I forgot to put some in there when I changed my coolant recently.

I agree though that losing a few cm after a couple of drives is definitely wrong.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-525122
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...