Jump to content
SAU Community

Recommended Posts

Hi guys,

I've got this problem where my refridgerant container keeps emptying out in about a week. I was just checking out the engine bay the other day and found the coolant container dry as a bone. Went out n bought some pre mixed stuff, and then filled it up. now it's almost gone again. There are no leaks or anything coming from the car, my driveway is spotless. Anybody know what could be happening?

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

if u cant see where the coolant is going u may have a cracked head and it goes to the exhaust manifold .have u r radiator cap pressure tested it may come out of there to the overflow and u dont see it cause it only does it while very hot .

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-523660
Share on other sites

I'm wondering - there is a hole in the top near the cap to let too much overflow out isn't there? Couldn't it just be evaporating out the hole over time? Mine seems to lose coolant over time too but whenever I check the radiator, it's always full to the brim.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524214
Share on other sites

I've got a hose from radiator to overflow bottle, but I think there's another hole which is square that doesn't go anywhere. I can't remember anymore, I'm going to have another check when I get home. Maybe I'm just deluded (or maybe the overflow hose is split or something).

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524222
Share on other sites

oh okay.....I got a black plastic (maybe 10mm) hose runnin from just below the rad cap (l/h/s) to the top of the o/flow bottle but I'm pretty sure there isn't another hole.......if there was how could the system keep pressure & once hot you'd see steam pissin out of the hole!

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524224
Share on other sites

Originally posted by RedLineGTR

Is the radiator low on fluid??

Check your oil. See if their is a milky colour within the oil.  

Is thier any smoke coming out the exhuast when the car is at normal operating temp.

This happened exactly same as me! filled the coolant bottle and next thing i noticed all gone! no leaks whatsoever. I even checked the radiator its all full. My car do smoke though during warmup but not normal operating temp.. is this normal?

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524375
Share on other sites

Yeah it's normal :)

I even think (not 100% sure) that when the engine is cold, the moisture in the air doesn't get hot enough to completely boil into invisible steam as it goes through the engine, as thus comes out as visible vapour.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524394
Share on other sites

SO its not just me that has issues with leaking coolant...

Trust me, there is no way a whole overflow bottle of coolant can evaporate even over quite a long period. If there is even a few centimetres difference in the level of the overflow bottle after u drive a few times, u have problem.

I changed my water pump, which fixed mine a bit. But then i discovered that small amounts are also coming from the head gasket area, so check this.

my head will be removed 2morrow to check where the leak is coming from...

Look around cylinder 6 for signs of leakage, because the metal is hot in that area coolant can leak out and evaporate without u noticing, but it leaves a stain.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524429
Share on other sites

guys , if u fill the bottle above the max mark u'll loose it very quick form the overflow on the bottle itself ( the bottle has an overlow ) .u should fill the radiator to the top and the bottle should be between the nin and max mark .

nrage33 if u loose coolant form the overflow u should be able to see it in the engine bay area .,

as for steam ( not smoke though ) coming out of the exhaust especialy when the outside temp is very cold thats normal in any car new or old until the cold exhaust pipes get to normal temp u 'll see plenty of steam clouds of it when very cold .once the ex pipe gets hot no more steam .

the hot exhaust air hits the cold pipe and u have steam , u'll notice when u start the engine the steam will start a few seconds after as soon as hot exhaust comes out the next couple of minutes more steam heaps more and then will start to lessen until it all goes .

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-525093
Share on other sites

Originally posted by siksII

Trust me, there is no way a whole overflow bottle of coolant can evaporate even over quite a long period. If there is even a few centimetres difference in the level of the overflow bottle after u drive a few times, u have problem.

I had another look and there is an extra square hole at the top like wrxhoon says. I reckon over a period of months (like mine has been) water could easily evaporate out that hole, because it gets pretty warm in there.

The thing is though, I don't know how easily coolant evaporates. So if you filled it up with coolant it's entirely possible that it would never evaporate no matter how hot your engine got. Unfortunately I don't have any spare coolant to put in the overflow bottle, I forgot to put some in there when I changed my coolant recently.

I agree though that losing a few cm after a couple of drives is definitely wrong.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-525122
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...