Jump to content
SAU Community

Recommended Posts

hi i have a RB25DET and it is stock really. and i was thinking about replacing the turbo with a supercharger like the ones that they use in the holden LS supercharger upgrades that u can get. and it would be nice to know if any body else has put a supercharger on, if it will work, what i will need, and what do i expect to get out of it.

im looking a supercharging it because as i understand it a turbo restricts the exhaust and has two turbines one to power the other which will lower the efficiency of the turbo especially in low rpm were as supercharger will be powered by a belt and is most likely to be more efficient.

if i am way of track then plz tell me

and yes i have seen

http://www.skylinesaustralia.com/forums/Su...er+turbocharger

i am looking a the performance between a turbocharger and a supercharger and also the price difference and what is needed for a upgrade

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/
Share on other sites

a supercharger is basically a boring version of a turbocharger.

its good for low down power but the top end is no where near as fun.

it takes power from the crank and uses that to suck in air and force it in

a turbo uses exhaust gasses that are already there.

get in a car with a real turbo and see what you think :ermm:

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280062
Share on other sites

if you really wanna make it worthwhile it from the ground up with a 3lt bottom end stroker kit, twin turbo and a centrifugal supercharger running into a positive displacement supercharger :ermm:

hope you brought your wallet

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280156
Share on other sites

a friend of mine had a supercharged rb25/30 in his vl commy. The amount of time and money it cost was really not worth it. Basically everything needed to be custom made and fabricated, even down to the supercharger. Dont get me wrong, the car went really well, but its a lot cheaper and easier to upgrade the turbo on an rb25

Depends on how much your willing to spend to be different

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280459
Share on other sites

im looking a supercharging it because as i understand it a turbo restricts the exhaust and has two turbines one to power the other which will lower the efficiency of the turbo especially in low rpm were as supercharger will be powered by a belt and is most likely to be more efficient.

if i am way of track then plz tell me

Incorrect, a turbocharger is more efficient because it is using something from the engine to make power which is not being used for anything else ie. exhaust gases.

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280886
Share on other sites

Some people were all into doing this on their N/A VL's 3 or 4 years ago, basically isn't worth it for the cost, especially on a small displacement motor. Their usefulness on V8s is even being brought into question with the proliferation of reletively cheap off the shelf turbo kits floating around these days.

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4281074
Share on other sites

i ran a torana at speedway many yrs ago that run a gm 471 blower with a ait split pulse t4 turbo blowing into the top of the blower .

it was awseome to drive the blower got it of the line like a cat with deep heat on it;s balls and the turbo kept enough air into it down the straights . it was a old 186 block with a 221 falcon crank with a alloy phill irvin head and mechanical endlee methanol injection .

got 3 seasons out of that set up b4 it dropped the crank out of the block every thing was custom made and cost a mint back then but you could not buy anything off the shelf . won many a race beating 350 powered cars i loved it lol

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4281971
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...