Jump to content
SAU Community

Recommended Posts

Anyone else looked through this site?

http://translate.google.com/translate?u=ht...sl=ja&tl=en

A whole bunch of interesting mods are listed, marked with R34 or R33 or both, and stars

for effectiveness, and difficulty rating.

I particularly liked his obsession with hi-brite LEDs, he changed all his interior lights over,

he did his own brake lights, he put in his own footlights.

Another good one is an illuminated key barrel. As he says, a 5.5m yen car has no illumination

for the key barrel? he buys the part for a different nissan then adapts it..

Also cool are how to adapt the LM-1 Air Fuel meter to display a small digital display for the driver,

hiding the main unit.. reducing brake noise.. refinishing the b-pillar when it is faded.. modifying

the MFD to improve the brightness of the shift indicator and to add a buzzer that you can hear

wearing a helmet .. taking off the brake backing plates for improved cooling .. cleaning the AAC

valve to improve idle stability .. LED number plate illumination .. installing reverse and front

camera (with side-views!) wired to MFD TV display ..

on and on ..

Edited by r34nur
Link to comment
https://www.sau.com.au/forums/topic/246802-japanese-site-with-r33-r34-mods/
Share on other sites

Anyone else looked through this site?

http://translate.google.com/translate?u=ht...sl=ja&tl=en

A whole bunch of interesting mods are listed, marked with R34 or R33 or both, and stars

for effectiveness, and difficulty rating.

I particularly liked his obsession with hi-brite LEDs, he changed all his interior lights over,

he did his own brake lights, he put in his own footlights.

Another good one is an illuminated key barrel. As he says, a 5.5m yen car has no illumination

for the key barrel? he buys the part for a different nissan then adapts it..

Also cool are how to adapt the LM-1 Air Fuel meter to display a small digital display for the driver,

hiding the main unit.. reducing brake noise.. refinishing the b-pillar when it is faded.. modifying

the MFD to improve the brightness of the shift indicator and to add a buzzer that you can hear

wearing a helmet .. taking off the brake backing plates for improved cooling .. cleaning the AAC

valve to improve idle stability .. LED number plate illumination .. installing reverse and front

camera (with side-views!) wired to MFD TV display ..

on and on ..

yo

that site is pretty confusing...

lol

is there a section for the LED tailights?

yo

that site is pretty confusing...

lol

is there a section for the LED tailights?

I put the wrong link.

the overall index is

http://209.85.171.104/translate_c?hl=en&am...HEZfCgHg#others

and LED tail lights is:

http://209.85.171.104/translate_c?hl=en&am...nG04Fj1u8OuwIiA

this one is good as well

http://209.85.171.104/translate_c?hl=en&am...SY6nrWmYuAYNO8Q

intercooler and oil cooler water sprayer!

Edited by r34nur
I put the wrong link.

the overall index is

http://209.85.171.104/translate_c?hl=en&am...HEZfCgHg#others

and LED tail lights is:

http://209.85.171.104/translate_c?hl=en&am...nG04Fj1u8OuwIiA

this one is good as well

http://209.85.171.104/translate_c?hl=en&am...SY6nrWmYuAYNO8Q

intercooler and oil cooler water sprayer!

have you tried any of this on your car so faR?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
    • Hello everyone, I am happy to join you.
    • Whereabouts are you, that looks exactly like Akira's old car....
×
×
  • Create New...