R/c Nitro Monster Truck

[stolen]

Heres the deal, bought this truck about 13 months ago, paid just under the $1000 dollar mark, had the hobby store run it in and used it about 3 times in my backyard, then moved into a unit. This crazy thing tops out between 75 to 80 k's ON DIRT. Pretty fancy setup for a nitro truck, it has a 3 speed gearbox and a nifty fwd and reverse setup to get you out of any situation.

Selling because it just doesnt get used...

Will throw in 4 new tryes and a spare gearset, tyres alone worth over $120 gears worth $25

ASKING $400

If your keen , the best point of contact is by phone, dont get the chance to get on here everyday...

GLEN

0402 312 197

HERS THE SPECS:

Unprecedented mechanical specs: GSR 28 engine (with recoil starter) + Center Divided Shaft Drive 4WD + 3-Speed Automatic Transmission

3-channel radio allows the use of reverse gear.

Main components (3-speed transmission, Diff. Reversing Transmission, Clutch etc.) are all factory assembled.

Patent pending! 3mm thick aluminum main chassis plate + reinforced resin side frames in high-rigidity chassis.

Suspension system that supports the sub-frame and improves the chassis' overall rigidity.

Equipped with slipper clutch that protects the power train and delivers optimal traction.

A front-mid mounted engine realizes almost perfect 50 : 50 weight distribution. The concentration of mass produces the agility and sharp acceleration capability.

Equipped with 29 precision ball bearings throughout the drive system. High efficiency transfer of engine power straight to the ground.

Tuned pipe to draw maximum power from the engine is a standard feature. Also able to be fitted with the optional rubber silencer for increased noise suppression.

Air cleaner with internal air scoop provides excellent carburetor protection.

Twin oil shocks fitted on each wheel support 4-wheel double-wishbone suspension.

Die-cast brake caliper produces reliable and effective braking.

Front hub and knuckle produce almost zero scrub so standard high-torque servos can deliver nimble steering.

Equipped with special radio box with separate compartments for receiver and batteries.

Length: 534mm / 21 in.

Width: 425mm / 16.73 in.

Height 280mm / 11.02 in.

Ground Clearance 50mm

Wheelbase 315mm- 326mm / 12.4 in - 12.8 in.

Track Width F/R 325mm / 12.8 in.

Gear ratio: 25.36/19.52/15.44:1

Tire size: 160mm x 100mm

Total Weight 5,650g approx / 12.4 lbs.

Motor 1 x GXR-28 with pull-start

Radio: Perfex KT-10 3-ch, 3-servos

GXR28

Displacement: 4.53cc

Bore: 18.1mm

Stroke: 17.6mm

Weight: 404g

Exhaust: Rear

Double Ball Bearing

Recoil Starter Attached

[stolen]

also comes with high cap battery pack for the servos

[stolen]

SOLD