Jump to content
SAU Community

Urgent - Auto Sparky In Osborne Park Area

kx2fity

By kx2fity,
in Western Australia

 Share

Recommended Posts

kx2fity Collaborator

kx2fity

Posted
Posted

As topic states I am in urgent need of an auto sparky in the Osborne Park area!

Basically my GTR is having a fueling issue so I need someone to diagnose problem so we can chuck in a new pump or relay etc to get her going!

I am working away at the moment and have been waiting on auto sparkys now for 2 weeks and have yet to have one come down and have a look and diagnose the problem!

The car is about to be put onto a transport truck and I need the car running by first thing next week, all i need is someone to go diagnose the problem the rest we can take care of?

If anyone knows of someone in the area or someone who may be able to help, I am more then prepared to pay for or supply carton etc!

Thanks,

Dan

kx2fity Collaborator

kx2fity

Posted
  • Author
Posted
What is the exact problem?? I may be able to tell you hw to fix it with more info. Is anything else affected as well or just the fuel system??

Not exactly sure of problem as I havn't been down there myself to look at but from what my panel beater has said: all electrics fine, pump is making an unusual noise - intake removed and no fuel being fired so presuming its fuel pump/relay end?

Is there anyway of testing relay/pump?

Are the relays vehicle specific?

kx2fity Collaborator

kx2fity

Posted
  • Author
Posted

Just talked to my Panel beater and he has told me that is the Relay making a funny noise (TICKING NOISE) and he has checked the fuel line and there is no fuel being fed?

So Maybe not the pump?

Where can I get myself a relay from?

Thanks,

Dan

kx2fity Collaborator

kx2fity

Posted
  • Author
Posted
Do what i said first.

Relay's are supposed to tick when they enguage, and tick when they release. They can be bought from many places. Nissan would be a start.

Thanks mate I will call my panel beater and get him to give that a go! Yeh I know relays tick when they release and engage but if its a continuous clicking of which it sounds like (from what the panel beater has told me) it could be turn itself on off on off!

Boss-zilla Mentor

Boss-zilla

Posted
Posted
Thanks mate I will call my panel beater and get him to give that a go! Yeh I know relays tick when they release and engage but if its a continuous clicking of which it sounds like (from what the panel beater has told me) it could be turn itself on off on off!

Sounds like either:

A: Bad signal from ecu to relay or

B: Bad ground to relay

A relay should only click once for on then once for off as previously stated. If its contiuious then it will be one of the above. From memorie the ground is on the other side of the boot latch to the fuel pump relay.

I go past O/P on the way home i can drop in for you and have a look, also those relays are hard and expensive to get from nissan however i think i have a few spare at home.

Cheers

Ross

Tezzah Experienced

Tezzah

Posted
Posted (edited)
Sounds like either:

A: Bad signal from ecu to relay or

B: Bad ground to relay

A relay should only click once for on then once for off as previously stated. If its contiuious then it will be one of the above. From memorie the ground is on the other side of the boot latch to the fuel pump relay.

I go past O/P on the way home i can drop in for you and have a look, also those relays are hard and expensive to get from nissan however i think i have a few spare at home.

Cheers

Ross

The sad thing is that a relay is a relay. It would be pretty easy to hook up a cheap relay to do the same job.

EDIT:

Thinking about what you said, its probably just a bad connection somewhere and the relay is more then likely fine.

Edited by Tezzah
kx2fity Collaborator

kx2fity

Posted
  • Author
Posted
Sounds like either:

A: Bad signal from ecu to relay or

B: Bad ground to relay

A relay should only click once for on then once for off as previously stated. If its contiuious then it will be one of the above. From memorie the ground is on the other side of the boot latch to the fuel pump relay.

I go past O/P on the way home i can drop in for you and have a look, also those relays are hard and expensive to get from nissan however i think i have a few spare at home.

Cheers

Ross

Hey mate would really appreciate that, I have talked to my panelbeater again in he is of down at kyp getting some other bits and pieces and is seeing if he can get a relay off of them!

Apparently the relay was clicking for about min+ and then stop etc so it sounds as if your write on the mark with a grounding issue!

The actual rear quarter panels and rear wheel arches were removed and new ones put in there place i wonder if it has in someway affected grounding of the relay etc!

Have sent PM to thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...