Jump to content
SAU Community

Rb26 N1 Block/cradle, Crank, Cp Pistons, Eagle Rods, Acl Bearings, Arp Mains

Angus Smart
 Share

Recommended Posts

Angus Smart Grand Master

Angus Smart

Posted
Posted (edited)

Item: Complete Rb26 Bottom end including sump if needed. (from R32)

Age: Most parts Brand new, crank used but crack tested.

Condition: All new parts with machining done (Almost at the stage of final assembly)

Price: Complete sell for $6000firm Note: value well over $7000

Willing to separate tho would rather sell together considering the work thats been done.

Location: Sydney

Value:

Cp pistons are +20 thou, well over $1000 new

Brand new Eagle rods $500+

N1 block is brand new item with machining, $2400 + machining work

Used tested cran $1000

acl bearings & arp main studs $200+

Rb26 sump + diff $500

+ the machining work $$$$

Comments:

Machining done as follows,

Hot tank Crank, Crack test crank,

Studs nuts fitted to main caps, Line hone 7 main's,

Rod check/set hone small end, rod check big end and align.

Tunnels measure sizes measure crush, check & set bearing clearances

Drill tap fit Plug

Comp spec micro polish crankshaft

Bore and Hone 6 cyl Torque plate

Trial build check deck and square

reface block square.

Balance 6 cyl manual.

Reason for sale, going to use my Mahle/Pauter rod combo instead

Edited by Angus Smart
Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

Bump,

Would like to add all the work has been carried out by a very good shop in Adelaide Pm me if your interested to find out who.

Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

good luck with that one buddy...

I've just checked the crank, dew to a few questions. it is the larger sized crank drive.

Cp pistons are 86.5mm (+20thou)

and going on what i can see, the ring gaps are the only thing left to be done +final assembly

  • 2 weeks later...
  • 2 weeks later...
Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

Pistons and Rods are sold and there is no arp studs left

the rest is still up for sale

Block/Cradle, crank and bearings. will take 3400 for block and crank,

photos of block etc..

post-31456-1234266963_thumb.jpgpost-31456-1234267000_thumb.jpg

post-31456-1234267140_thumb.jpgpost-31456-1234267201_thumb.jpg

post-31456-1234267229_thumb.jpgpost-31456-1234267284_thumb.jpg

r32r32 Enthusiast

r32r32

Posted
Posted
Pistons and Rods are sold and there is no arp studs left

the rest is still up for sale

Block/Cradle, crank and bearings. will take 3400 for block and crank,

photos of block etc..

post-31456-1234266963_thumb.jpgpost-31456-1234267000_thumb.jpg

post-31456-1234267140_thumb.jpgpost-31456-1234267201_thumb.jpg

post-31456-1234267229_thumb.jpgpost-31456-1234267284_thumb.jpg

Rods and pistons sold to me! Thanks Andrew!!!!

Andrew is a great guy to deal with guys!

Free bump!

  • 2 weeks later...
Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted (edited)

Block. crank cradle bearings still available.

Crank was rebuild/checked by Crankshaft rebuilders in Sa or Victoria.

Edited by Angus Smart
  • 2 weeks later...
vr_executive Rookie

vr_executive

Posted
Posted
Block. crank cradle bearings still available.

Crank was rebuild/checked by Crankshaft rebuilders in Sa or Victoria.

U willing to sell the cradle seperate if so message me. Cheers

  • 1 year later...
rb26sedan Apprentice

rb26sedan

Posted
Posted
Block. crank cradle bearings still available.

Crank was rebuild/checked by Crankshaft rebuilders in Sa or Victoria.

i'm new to the forums so i can't send PMs yet.. do you have an e_mail where i can contact you?

i'm interested in the bearings

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • Duncan
      Who has a Infiniti Q60, Q50 (V37)?

      By Duncan · Posted

      The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...