Jump to content
SAU Community

Parts Galore, Cusco,apexi,coilovers,turbo And More

Sr PWR
 Share

Recommended Posts

Sr PWR Rising Star

Sr PWR

Posted
Posted

Hey guys i got alot of parts im selling, i havent put up some things yet this will be getting updated every week.

CTS coilovers, 8000kms old . fully adjustable, 8 and 6kg springs, can be height adjustaed from the top of the coilover or bottem, damper control, camber tops. etc.

these are awsome coilovers. suit s13/180sx

$1200

Z32 AFM with plug 5000kms old

$250

Custom hard intake pipe painted black, s13/180sx

$150

Apexi pod (super induction kit) with bracket etc to suit z32

$80

Apexi power fc to suit sr20det redtop s13/180sx basicly brand new with handset

$900

Nismo 740cc injectors 5000kms old

$450

Splitfire coilpacks s13/14 5000kms old

450

Cusco front struct brace, suit s13/180sx

$150

Ebay rear stuct brace s13/180sx

$60

CTS Engine damper not cheap s***

$100

Oddesy PC925 batery, 5000kms old aswell

$250

PC 925 Specs:

* 925 cranking amps for 5 seconds

* 870 cranking amps for 10 seconds

* 765 cranking amps for 20 seconds

* Short circuit current over 2400A

* 28 amp hours

* 50 minute reserve capacity with 25amp load

* Female brass terminal w/M6 SS bolt

* Length 6 15/32"

* Width 6 7/8"

* Height 4 7/8"

* Weighs 24 lbs

* Rugged Drycell sealed design

* Military grade

* Vibration resistant

* 60% more starting power

* Deep discharge reserve power

* 2 year storage life

CUSCO front and rear sway bars, awsome condition, s13/180sx

$250 each

180sxparts002ek2.th.jpg

180sxparts003nw3.th.jpg

180sxparts004fd1.th.jpg

180sxparts005xt2.th.jpg

180sxparts006az3.th.jpg

180sxparts007dc6.th.jpg

180sxparts008ts7.th.jpg

180sxparts009xc4.th.jpg

located in qld, willing to ship at buyers expense.

pm for more info.

Sr PWR Rising Star

Sr PWR

Posted
  • Author
Posted

BLITZ DSBC- duel soliniod so u can run 4 different boost settings, has a little LCD screen so u can see everything your doing. awsome controller it held 20pounds no problems.

$380

Blitz radiator caps x2

$30 each

Greddy oil cap

$50

Greddy gearknob

$50

Greddy sandwich plate for s13/180sx suits s14/15 aswell i think

$170

DEFI guages, only 3 months old. no marks on them comes with EVERYTHING even the water temp holder.

OIL press

oill temp

water temp

boost

control unit 2

$1000

OS gekin twinplate clutch, been rebuilt by jim berry less than 1000kms ago who done the FULL MONTY (best of all best rebuild), cost me $1400 to rebuild. anyone who knows jim berry clutches are awsome, this clutch is very easy to use for a twinplate. cost $2200 brand new, suit sr20det 180sx/s13/14

$1200

Rebuilt s13/180sx sr20det gearbox, brought this to put in my 180sx never got around to it.

$750

MORE PARTS

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Shoota's R33 GT-R RB30/26

      By r32-25t · Posted

      It’s definitely an import, the Aussie ones have reflectors in the rear bar, it’s also a turbo which none of the Aussie one were.    I remember back in the day I want a twin turbo z32 so bad and then I saw a 32 gtr and that was the end of that lol 
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      Same can be said for Subarus motors ha ha!   I like the 300ZX, I nearly bought a Z32 before I bought my first Skyline. It was going to be a project. Then I found out there was a bit of a dodgy title with it... As in, someone attempted to commit insurance fraud with it and there was now some dodgy legalities around it. So at 18 I walked away from it.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      The below is what the readings I had with the fuel pressure gauge which were correct. It seems like the issue is mainly during drive and not idle. I bought the new hanger hoping it could be the issue, perhaps I ruined something while cleaning, but I have not installed it yet since I have to wire up everything with the new plugs.
    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      Actually, that's not entirely true. It's also the same motor in the 1st gen Nissan Cube but they're rare as hen's teeth.  
    • Duncan
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By Duncan · Posted

      Yeah it is always worth testing and balancing actuators out of the box, just set the pressure regulator on a compressor very low (eg 5 psi) and increase it slowly to see when they both move.....unfortunately while you may be able to adjust the length of the actuator rod to minimise any difference, the actual pressure they move from is not adjustable so you need a well matched pair. And yes, the VCAM is probably contributing; the earlier in the rev range they come on boost and the slower the revs build (I think your demo was in 5th), the more you notice it.  Driving at WOT through 1st, 2nd, 3rd etc you will probably never hear it as any shuffling starts and is over super quickly
×
×
  • Create New...