Jump to content
SAU Community

4.3/4.4 R200 Diffs, Z32 Conversion Kit, Raybrig Hids, Advan Rcii + Advan Semislicks, S15 Bolt On Undertray, Jdm Earthing Kit, Rear Swaybar

_Wing_
 Share

Recommended Posts

_Wing_ Proficient

_Wing_

Posted
Posted

@ sydney/homebush, can do package deals, first in first served, all offers considered, can deliver anything but big things you'll have to pay :)

r32gtst r200 diff w/o abs 4.3/4.4 gears 6 bolt

$150

shipping via courier (auspost wont take it as its too heavy) is approximately $50-$100 depending on where you live

r33gtst auto r200 VLSD diff w/o abs 4.3/4.4 gears 5 bolt

$150

shipping via courier (auspost wont take it as its too heavy) is approximately $50-$100 depending on where you live

*rare* 26mm 100% OEM nissan quality s15/s14 radiator, from s14, direct bolt in onto any s14 and s15, your stock one is 12 or 14mm thin :( will not leak on you like the china shit lol

$150

BRAND NEW s15 bolt-on sump protector bash plate, 3mm thick (will fit s14 as well)

$200

price dropped: $180

price dropped: $170

USED genuine and damn rare Raybrig HID foglights!!, including all wiring and Raybrig switch, Raybrig relays and Raybrig housings

$590 express overnight delivered

price dropped: $560

price dropped: $500

price dropped: $480

USED quality brand NARVA foglights, model = compac 80, 55w, 80mm wide version

$90 express overnight delivered

price dropped: $70

price dropped: $60, sells for $130 at autobarn! (pic from autobarn attached for reference :))

USED jdm blue 4gauge-thick (that's damn thick) gounding/earthing wire kit

$60 express overnight delivered

price dropped: $50

price dropped: $40

nigels sr20-z32 gearbox conversion kit with an extra sr20 front tailshaft - modify that and keep your original tailshaft, that way you can keep your full standard tailshaft unmolested. kit has been mounted on but changed my mind at the last minute hence selling everything i have.

price: $880 including tailshaft, saves you $400!

r33gtst rear swaybar with d-brackets + d-bushings and full endlinks

Price: $50

4x Advan Racing "RCII" @ 17x8.5" +31offset, 5x114.3pcd

4x Advan Racing "A048" semislick tyres @ 235/45/17MH

A set of lightweight Advan Racing "RCII" wheels 17x8.5" +31 offset, previous owner of the rims had them on a nissan skyline and said one has been fixed and repainted so that's why there isn't a sticker, the others have some rash here and there so please check the pictures, with a set of Advan "A048" semislick tyres in 235/45/17MH with enough tread for a trackday or two and some commuting :banana:

Price: $1800

@ sydney/homebush, can do package deals, first in first served, all offers considered, can deliver anything but big things you'll have to pay :banana:

CLICK HERE FOR PICS PICS PICS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • PranK
      2001 R34DE

      By PranK · Posted

      R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...