Front Facing Plenum, R34 Brakes, Hd Clutch, 14/15/16" Rims 4 And 5 Stud, Rb30 Head...

[SKiT_R31]

Front facing plenum, Greddy style, has 80mm TB bracket, comes with 80mm billet throttlebody, these are known for dodgy casting, has had dodgy spots between water jackets tig welded and is ready to go.

$500

RB20-25DE/T or RB30e/+t clutch, Excedy HD organic, these clutches hold reasonable power (rated to ~240kw flywheel i think) and have a good feel under foot, safe to ride etc, i have the same type in my 31, rb30e+t, this one has never been used.

$300

Stock RB25DET injectors, 370cc side feed

$50

Got some R34 GTT brakes, front and rear, discs and calipers, includes 5 stud front and rear hubs/drums etc, calipers and hubs in great condition, discs have some surface rust - will need machining, was originally for S13 brake and stud conversion.

brakes were sat on grass for photo's only, have been stored in shed for some time.

offers? prefer to sell together...

4 x 114.3, set of R31 Skyline Ti rims (15"), 2 have decent tyres, 2 are low tread. Have had the clear coat removed and have been polished some time ago, with a go over of some metal polish would come up like mirrors again, they look sweet on silvia's etc, good offset. great condition

$180

4 x 114.3 14" rims, off somsort of nissan (stamped into them) these have no centre caps as i lost one, do have the other 3 but it looks much better without imo. No tyres (2 still have tyres on them, but bald) no gutter rash or scrapes.

$100

5 x 114.3 16" rims, nissan S15/R33, no tyres, a few scratches but should come up allright with a clean etc (brown ooze is tyre grease)

$150

5 x 114.3 16" rims, z32 300zx rims, good tyres all round, rims in top shape, could do with a wash...

$250

After cash, or offers from some decent 4x114.3 rims, for a silvia or 31, in 16" or bigger, even wtb rims if anyone just wants to sell, offset for silvia/r31.

RB30e head, has been dismantled, clifters cleaned, crack and pressure tested, and everything properly torqued back together by workshop, has also had surface machined ready to go back on block.

Head came off for prepping to go on a block i baught, but didnt end up using it, head had no heat or warp damage.

comes with monotorque acl head gasket, and afaik stock cam.

$150, want it gone

Edited January 5, 2009 by SKiT_R31