Jump to content
SAU Community

Recommended Posts

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

thanks for the help just hav too work out a budget new couple of weeks im gettin frnt mount 044 fuel pump fuel reg

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352041
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

650cc injectors?

you will piss 300rwhp in on stock injectors.

i'd be going with what michael said first, safc, 25 turbo.. etc.. then see how you go. can always sell the safc/turbo for pretty much what it cost you and upgrade if/when you want more power.

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352048
Share on other sites

people have done mid to low 13's with 250rwhp

+1 r32 is lighter than the r33/34 so you dont need as much power

i ran 13.0 with 300ish rwhp (top end speed was good for a mid 12's 112mph) so my advice would start at 250rwhp and see where that takes you, remember practice makes perfect and dont expect to be super fast at the drags your 1st time :laugh:

edit: beaten by mitchy_

Edited by [Michael]
Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352049
Share on other sites

+1 r32 is lighter than the r33/34 so you dont need as much power

i ran 13.0 with 300ish rwhp (top end speed was good for a mid 12's 112mph) so my advice would start at 250rwhp and see where that takes you, remember practice makes perfect and dont expect to be super fast at the drags your 1st time :P

edit: beaten by mitchy_

thank for ur help micheal i got a qoute today for a x force turbo bak zorst for 1450 is that a good and wat sore of power would i get

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352744
Share on other sites

thank for ur help micheal i got a qoute today for a x force turbo bak zorst for 1450 is that a good and wat sore of power would i get

hrmm Not saying thats bad but its alot i paid

under 1k for a turbo back 3" custom Zaust from my mate i could ask if you isnt busy to make you one all you need to get it the high Flow cat (or decat) and Muffler (cannon)

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352754
Share on other sites

hrmm Not saying thats bad but its alot i paid

under 1k for a turbo back 3" custom Zaust from my mate i could ask if you isnt busy to make you one all you need to get it the high Flow cat (or decat) and Muffler (cannon)

thats would be good bro maybe ill buy the dump pipe and hight flow cat how much am i lookin at payin

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352789
Share on other sites

go to justjap.com have a look at what styles / prices

if not call them they are nice people you would be looking at like 100 - 250 for the Dump pipe DEPENDS which one u like / wants.

High flow cat is around 175 + / or decat is free :P ha

then not to sure about sending it over its not to much!

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352859
Share on other sites

Anything can happen on the track its a different surface comes down to practise and time / driver! so you can have 250 hp and still run 14 /15s

best guess is to try for yuorself, its hard to judge

yeah i kne but very soon im gunna take it down hehe i got stock susp jus hav too give my car a serv and stuff

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352959
Share on other sites

Should be all good i still need to head down want to see what mine is running as it is stock still

got

FMIC

Custom straight turbo back Zaust

pod

JIC Coilovers

and other bits

hopefully get in the 13's

then need get a tune and see how it goes!

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352973
Share on other sites

Anything can happen on the track its a different surface comes down to practise and time / driver! so you can have 250 hp and still run 14 /15s

best guess is to try for yuorself, its hard to judge

this is very true

went down last week to the drags and there was a guy in a 2JZ Supra TT running 17s????? :P

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352982
Share on other sites

17's!!! unless he had no legs or it was a N/A with bagdes hahaha

wow

it had a fmic on it and his number plates we 2JZ but i dont know, there was no bov and those things weight a fair bit but it was only on par with v6 commonwhores. We thought he was just a tool who had put badges on and bolted a FMIC in to look "cool"

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4353018
Share on other sites

it had a fmic on it and his number plates we 2JZ but i dont know, there was no bov and those things weight a fair bit but it was only on par with v6 commonwhores. We thought he was just a tool who had put badges on and bolted a FMIC in to look "cool"

how will i find him bro

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4353025
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...