Jump to content
SAU Community

Recommended Posts

Hey guys i have a r34 25gt and about 1 week ago while driving my engine light came on, so i pulled over and turned off the engine and turned it back on again, it was gone for about 15mins and it came on again, i took the car to this crappy mechanic and they didn't have the computer to analyze the error code. But they told me to reset my computer by taking the battery and if the engine light dosnt come on again everything should be fine, so i did what he said and surely the engine didn't come back on.

But today while driving to work the engine light came back on, but after work i took it for a drive and it didn't come back one....anyone have any ideas what problem this could be?

I called my local nissan dealer and they said their computer is not compatible with imported skylines...is there any mechanic around Sydney that has a computer that can analyze the error codes?

also a quick question i have a semi auto r34 and theres a button with A/T SNOW what is that for?.

cheers

Edited by MaShi
Link to comment
https://www.sau.com.au/forums/topic/251878-engine-light-randomly-turning-on/
Share on other sites

sorting this out is just so simple if you put a teenie bit of effort in - you absolutely don't need Nissan dealer or anyone

you can get the error code in about 2 mins all you need is a piece of wire - I am not going to explain everything as the topic has been covered many times on here (SAU) - what I will recommend is YOU download the R34 Engine Manual - FREE ON NUMEROUS WEBSITES - just google it - then spend all of about 5 mins reading it - it tells you everything you need to know and do

you will probably then work out you have a Code 21 and take all of our words for it that means new coils (Splitfires best) - we all have been thru what you are now experiencing - FIRST just the checklite restart and all appears OK but soon enough if you do nothing one day the car will begin very serious misfiring maybe even to point of not driveable - not good if you are 100s k s from home

believe me you don't need Nisssan dealer or mechanic to fix the problem - so save big money avoiding labour service charges and get to it

Cheers

i wen to get it tested today, came out with error code 21 : main ignition system (something like that), the mechanic reset the computer for me and said if it comes on again come check it again and if its the same error code then its your coilpacks, and on my way home the engine light came on again.

so how long do you guys think i have until it start to mis fire?

mine came on when i was driving home from work, it came up with the engine light, did an engine diagnostic cuz it sounded n drove like a rexi (no offence lol :D )...

replaced all coils with splitfires n been beaut eva since.. no point replacing the bad 1 cuz if 1ns screwing up its more than likely they will all start going...

strange it aint miss firing already tho :laugh:

<br />yeah the car is not shaking or miss firing.... its pretty weird<br />i wanna make sure before spending 700$ to change them <img src="http://www.skylinesaustralia.com/forums/style_emoticons/default/sad.gif" style="vertical-align:middle" emoid=":3some:" border="0" alt="sad.gif" /><br />
<br /><br /><br />

its a real nuisance about o.e.m R34 coils but there is no option except pull your coils out and find the duds - my experience was Code 21 randomly appearing first with absolutely no noticeable effect but within less than a 1000k big trouble - it was suddenly so bad it was virtually undriveable luckily I was only about 3 k from home so ran it back anyway on about 4 cylinders as it was early Sunday and no traffic about - not a nice experience - hardly made it back - put in new coils and instant new car feeling!

this is what you need to do.

Take the kick panel off, take the ecu out of the car (undo the 10mm bolt) unplug ecu from harness.

Then plug the ECU back in, when you put it in just tightening up the 10ml bolt is NOT good enough, give the bolt 2 turns then push the plug in on EACH side then repeat this untill the bolt is tight.

Make sure the ECU is pluged in ALL the way and there is no gap. I have seen this happen on countless nissans where people DON"T put the ecu back in properly and they get error codes and engine lights because a sensor does not have a good enough connection.

Try this and let me know how it goes before spending big $$$ on coil packs. Even if it looks like its connected properly, still take it out and put it back in the same i explained.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is anyone running these axles? R32, R33, R34 GTR front Axles. shafts itself rated 950hp. Suit all RB26 engines Croydon, Melbourne, Victoria Would be nice to pay half the cost of Driveshaft Shop Axles. I'm building an AWD S13 Coupe that is very low ride height (high cv angle) compared to stock R32. Has an RB30 with appx 600whp. Just looking for feedback. Thanks, Josh- https://www.instagram.com/feng_shui_garage/
    • Been a long time since r31 got some love, my brother dropped a shitbox ls1 crapadore in my lap to fix up.  Put a wiper motor in as the flooded one was no longer alive.  got windscreen wipers now. Time to clean respray and install back in the titanic  IMG_0505.mov
    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
×
×
  • Create New...