Jump to content
SAU Community

Recommended Posts

hey people my r32 gtr motor finally ready to go into my r34gtt gettting in tuned at boost worx in adelaide mods dun to motor r

tomei forged pistons

jun conrods and arp bolts

r33 crank balanced

grex oil pump

alc race bearings(big end and conrod)

modified r32gtr sump with tomei oil baffel

sard fuel pressure regulater

sard 700cc injectors

tomei fuel rail

gates race timing belt kit

nismo group A turbos

metal head gasket

cams

adjustible cam gears

splitfire coil packs

k&n pod filter kit

power fc d jetro with hand controller

custom 3&half inch zaust

jjr oil catch can

clear timing belt cover

044 fuel pump

greddy pro spec 2 boost controller

exedy 3 puk racing clutch

nismo engine mounts

2 way lsd

painted all parts at my work

rocker covers r white pearl

coil pack cover is 350z blue

rest of it is medium silver

cam gears r candy blue they looked very old ill keep u updated

post-43842-1231576982_thumb.jpg

post-43842-1231577149_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/251959-rb26-is-ready-to-go-into-my-r34gtt/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...