Jump to content
SAU Community

Recommended Posts

bought this before i bought my stag, intended to hook it up to the xanavi screens in stageas.. which mine doesn't have lol it's been used also

it's a JVC KD-AVX1, has it's own 3" screen or you can hook it up to exterior screens like the factory one :)

want $250ono, alternatively i don't mind keeping it as i'm debating running it so i can fit a reverse camera :)

* DVD/CD receiver with built-in amplifier (20 watts RMS/50 peak x 4 channels)

* 3" TFT LCD monitor built into the motorised, fold-down faceplate

* On-screen display of JPEG images

* Plays DVDs, DVD-Rs, DVD-RWs, CDs, CD-Rs, CD-RWs, Video CDs, and MP3/WMA discs

* Giga MP3 capability — will play up to 100 hours of MP3/WMA files burned onto a single recordable DVD

* System control via front-panel control keys and menu system

* 7-band iEQ

* CD changer controls

* Audio/video input

* Backup camera input

* Audio/video output<<<<<<<<<<<<<<<<<<<<<<<

* Dual-zone mode

* 5-volt front, rear, and subwoofer preamp outputs

* Wireless remote

* DVD frequency response: 16-22,000 Hz

* DVD signal-to-noise ratio: 95 dB

* FM sensitivity: 11.3 dBf

b_kdavx1.jpg

can get actual pics on request

Link to comment
https://www.sau.com.au/forums/topic/252368-jvc-dvd-headunit/
Share on other sites

  • 2 weeks later...

hi ryan,

Mikes in adelaide. Chef stagea and I are doing a trip to Sydney on Monday to look at a Autech, so could maybe help out with something.

Mike sort something and talk to adam or myself and well c what we can do :)

hi ryan,

Mikes in adelaide. Chef stagea and I are doing a trip to Sydney on Monday to look at a Autech, so could maybe help out with something.

Mike sort something and talk to adam or myself and well c what we can do :P

Yeah that would be awesome if you could get the deck up here.

I think i was talking to Chef Stagea about a lift to Lane Cove to look at an Autech. I can't really help out during the week. After hours fine tho

Ryan,

I have a lift sorted in sydney. If you after the deck get onto it quick smart cos we fly out monday morning early so Mike needs to get it to one of us!

Also we wont be in sydney very long so we'll need to sort it out quick smart!

  • 2 weeks later...

Hey mate, i really want this deck please send with kidafa

i can direct deposit no worries or give cash to whoever you would like.

I would prefer Direct Deposit though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
    • lol the 2nd one boss, thank you for pointing this out. I feel as i spend more time here this intro message is some thing i will always make me laugh and shake my head at. Perfect Intro:  I have the vehicle  
    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
×
×
  • Create New...