Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

ok got the price, your looking at about $185 but itll have to come from japan. we dont usually keep them in stock cuz not many people actually buys them but we do get a few sometimes and they have to order it as well.

the thing about the harness is that not many people actually pays much attention to it so when the car is misfiring and they do the usual checks like the coils, sparkplugs, igniter, you know the usual things but forgot about the wiring. the harness deteriorates overtime and become crispy and fall apart easily because of 19 years of exposure to heat. id recommend getting a harness when changing the coilpacks for a piece of mind so you dont have to take it all apart again.

Edited by R33_NICK

Popping on WOT under boost MAY be detonation.

Considering your plugs etc are ok, and your spitfire coils are ok, the next place to be looking would be fuel.

On a side, it is a bit tough to say, and some people will get upset, but I have seen splitfire coilpacks out of the box that didnt provide spark as well as factory coils - rare, but it does happen.

Anyhoo, suggest you take it into Hyperdrive, or another REPUTABLE workshop and get them to check your air fuel mixtures (and fuel pressure) on the dyno ASAP. I have seen a few smashed engines due to fuel pumps getting tired, or injectors getting clogged (when was the last time you changed your fuel filter BTW? and when did you last clean your AFM?).

Please just get it checked out to make sure it's safe before you go experimenting - especially if you don't know for sure what it is - better safe than sorry IMO

Just get yourself an R33 series 1 turbo, and a stock ecu flash tune.

Whats that like $700 or less?

I dunno how much the R32 ECU retune costs. But a stock R33 turbo is about $300?

thats what im running and it goes sweet only cuts fuel at 15psi

the thing about the harness is that not many people actually pays much attention to it so when the car is misfiring and they do the usual checks like the coils, sparkplugs, igniter, you know the usual things but forgot about the wiring. the harness deteriorates overtime and become crispy and fall apart easily because of 19 years of exposure to heat. id recommend getting a harness when changing the coilpacks for a piece of mind so you dont have to take it all apart again.

+11ty

thats what im running and it goes sweet only cuts fuel at 15psi

A remapped 32 ecu? or a stock ecu?

You're looking about $800 to get your stock 32 ecu remapped, I have one running my RB30 w/ z32 afm and 550cc injectors, very good solution and if you *must* have readouts like with a PFC hand controller then get a carPC and datascan :ermm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
    • Dang, those BBS are so nice! 
    • Yeah it is wild how much wider the Yokohama A050 in 255/40R17  vs Yokohama AD09 in 255/40R17 sits on the 17x9 +22 considering its even from the same brand and adjacent product family 
    • Would love to see some examples of WMI making the same as E85. Only thing I've ever found is this one.  Which suggests WMI is not worth much at all. 
    • And now the washer bottle looks like an orphan. You're going to have to spend money on a wrinkle black painted fabbed ally one of those. Oh, and the brake MC res. That won't look any good after you've gotten rid of the washer bottle. You going to need to go back to work to keep up with this?
×
×
  • Create New...