Jump to content
SAU Community

Recommended Posts

In japan it's not hard to find a r33 GTR for $25k - and that's from a dealership.

r32 GTR can be had for under $10k - but that sort of car is not one I would want

r34 GTR are still a little pricey - but the high australian $ makes them look pretty cheap these days. The higher spec models remain high, to import, as they tend to get slapped with luxury tax on top of the usual extras - due to their price bracket.

This is why I would never buy a GT-T r34 - if resale price was something I cared about. But I guess recent 33 pricing, gives an indication of how quick things change.

I still believe you get what you pay for, meaning u'd need a solid $40k for a good condition R33 GTR and a good $35k for an R34 GT-T.

Hopefully in a year i'll be able to find either 1 of the above to buy.

Err, guys? Have any of you used Ebay before? That is the starting price, not the Buy It Now price. Once word gets out there will be bids. I would be very surprised if it didn't go for at least a few grand more than that.

Either way, I think Ebay is a stupid way to sell such an expensive car. You have such a tiny window of opportunity, which means that people that would genuinely pay a lot more for what the car sells at the final price just can't put a bid in because they can't come up with the cash in such short notice.

Even if this car sells for the minimum price, that is in no way an indication of the car's true value. The buyer could easily then take his time and sell it for closer to $38-40k. At $34k I think it would be an ideal investment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...