Jump to content
SAU Community

Recommended Posts

ive got a mate with a hks 2530 out of a sr20. Now if i get 2 of these will it bolt straight onto my R33 GTR. At the moment i have HKS 25/40 turbos on there, but they dont spool up till 5000 rpm. Are the hks 25/30 a better option. Im after around 270-300kw and the most responsive turbo is what i want. From what i read it is but want to make sure before i splash the cash

Now the Power FC hand controller. i don't have one in my r33 GTR. Can any power FC hand controller connect to the one in my car atm? Is it just a plug in thing (im thinking so) and are all plugs the same for every different model car?

Also i have some N60 AFM (purple sticker) from a RB25 or maybe RB20 motor in my R33 gtr. from what i have read these are good for around 350hp. my goal is around 270-300kw which is 360-400hp. I am now assuming i will need to upgrade these to n62 (z32) afm. Im also assuming these are a direct fit after seeing a few pics on the forum of the two, but what i want to know is will my engine need a retune aswell

A bit of background about the car. its a r33 gtr series 3 with HKS 25/40 turbos, turbo back exhaust, PFC, n60 AFM, adj cam gears, and a blitz e-boost controller. Car is making 240kw atrw on 13 psi (safe tune)

Edited by duff

i have 700cc sard injectors already. i just want to get everything at once and bolt em all on to save on tuning. its just the lag im disappointed with atm. been reading alot and seems they are not the greatest turbo option for the rb26

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...