Jump to content
SAU Community

Finially My New Turbo Is Done


Recommended Posts

Originally posted by akeenan

its a good choice. but im slightly worried about the light blue clashing with your darker blue interior.. :D

true that!

Seriously its what i hav been playing with over the last few months up in north qld. That pic is of a small hydro electric turbine, it works the same way as a car turbo execpt the water enters and spins the impellar which spins a shaft which is connected to a generator which produces electricity.

My company is building the whole power station at the moment and the good bits like the turbine just went it!!

Also i am the site manager at the moment for the rest of the mechanical section which is getting installed.

at see over this son hereafter word by word and sentence by sentence, my heart can't be calm once in a very long while, shocking!why would like a son that like?!many years in bbs in horizontal network in my life , from thinking any further can't there is any a son can move me, have never thought to come in sight of such ingenious and incomparable like this an a son today.

floor son of rajab, is you let me comprehending the e someone outside the person profoundly, there is day outside the day' this words.thank you !

at see over this son hereafter, i did not replies immediately, because i fear me the vulgar replies unbearablely will compromise this net last rare a son.but i replied still, because feel if can't leave behind at the such fascinating a son own net, that i die too can't the purpose of name !can leave own net an a matter for is how pride behind at the such fascinating a son!floor son of rajab, beg your pardon my selfish!

i know that describe the floor son of rajab you with the how gorgeous words regardless the fascinating degree of a son is all not enough, is all hypocritical, so i think only of to say a:your a son is too good-looking!i would like to the lifetime sees the bottom!

this son conceives outline novel, the topic has the mental strategy only, the paragraph is clear, details , fall the rise and fall, the main line is clear, fascinating, mild display the extraordinary literature Œ÷ bottom inside, is witty it may be said, a classic, is a model that my generation should the study.

in regard to the angle of the cloak-and-dagger art, this son do not calculate too successful, but it of the experiment is however the far far larger than in meaning the success oneself.positive so-called:" a the horse dashes about, shooting the birds lead the bow, the world is all in my heart!" floor son of rajab really not the is to has boundary new generation to open the mountain strange!

i will have disappointed to this community originally, feeling that this community had no the prospect, the in the mind is filled with the woe.but saw your this son, let me producing the hope to the community again.is a fire that you let my in the mind set alight the hope afresh, is you make my heart cold ashes burn again, is you rescued me a stirs the cool stiring the cool heart!

i decide originally and can't return to any a son in the community, but saw your a son, it is what must return that i tell the oneself this son!this is once-in-a-lifetime o.k. stick!heaven contain eye, let me getting the such fascinating and incomparable a son at the excellent the can view in year that living!

floor son of rajab, you want to continue diligent!you are the hope of the community!

Just kidding......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...