Jump to content
SAU Community

Recommended Posts

Since I have bought a track-only racecar, I need to sell the Cefiro to get some boring bomb that can tow cars.

I brought the car in from Japan and did the SR conversion before compliance. Ive had the car for around 4-5years

The car has approx 170k on it but the engine has around 100k

#Car

White

electric sunroof

R32 gtst 4pot front brakes and R32 gtst 2pot rear

#Driveline

SR20DET redtop

gt28r turbo

turbo-xs bleed valve

Bar and Plate FMIC

Turbosmart type 3 bov

Pod Filter

3in Turbo-back exhaust with twin tip xforce muffler

40mm alloy radiator with twin thermos

Exedy 9 puck button clutch

Viscous LSD

Cusco catch can

Walbro fuel pump

#Interior

Grey interior

Momo steering wheel

Pioneer CD/MP3 player

#Suspension

Front Strut brace

Cusco adjustable castor rods

Alloy subframe bushes

hicas lock kit

6 Months Rego

$6,500 no offers

front_1.jpg

rear_1.jpg

cef1_resize.JPG

cef2_resize.JPG

cef3_resize.JPG

cef4_resize.JPG

cef5_resize.JPG

Coilovers, rims and S2 taillights not included - all replaced with stock items

This car weighed in at 1220kg just prior to compliance, so they are a lot lighter than they look (especially without the nugget RB motor)

Bad things - One guard is a different colour white (as seen in pics), gearbox has a bit of bearing whine (but shifts perfectly)

Not much interested in trades

Link to comment
https://www.sau.com.au/forums/topic/257731-sr20det-cefiro-6500/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...