Jump to content
SAU Community

Recommended Posts

belkinn1.jpg

Overview:

The N1 Vision wireless router offers an easy way for you to view your network's broadband speed, computer bandwidth usage, and the status of your connected devices - all from an easy-to-read display.

Packaged in a new sleek and sophisticated design, N1 Vision offers the best in networking performance with its wireless 802.11n* 3x3 radio design and wired gigabit ports. The N1 Vision wireless router continues Belkin's commitment in providing the best user experience in the home market through its Plug-and-Play "CD-less" installation and simple network security setup.

Features:

Interactive Status Display shows your network's broadband speed, computer bandwidth usage,the status of connected network devices, and more. Plug-and-Play CD-less setup Easy Security Setup with support for Wi-Fi Protected Setup™ and Multiple SSID 802.11n draft 2.0 compatible - 3x3 radio design provides excellent speeds and complete wireless coverage 4 Gigabit Ports

1018-N1-Vision.jpg

Specifications:

Browser Based Management Browser Based Management

Link Rate Up to 300 Mbps in 20/40MHz Channel Mode

Maximum Users 253 (LAN), 16 (WLAN)

Patent Pending LCD Connected Devices , Download/Upload Speedometer , Guest Access Network , Network Display , Usage

Plug and Play Setup Plug and Play Setup

Ports WAN-- 1 Gigabit Port LAN-- 4 Gigabit Ports

Range Up to 1,600ft*

Security Wi-Fi Protected Setup; WPA, WPA2-Personal, 64-bit/128-bit encryption, Multiple SSID

Specifications Standards IEEE 802.11b , IEEE 802.11g , IEEE 802.11n draft* , IEEE 802.3ab

VPN Support IPSec pass-through , PPTP

looks almost brand new.

all cables and softwares included.

RPR $399

asking price $250

belkinvision.jpg

Edited by isr3
Link to comment
https://www.sau.com.au/forums/topic/257906-belkin-n1-vision-mimo-modemrouter/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
    • Sounds like a misfire. Check fuel pressure and don't even think about going into boost while it's like this unless you enjoy engine rebuilds.
    • Just. Gasping. Here. Just. Gasping.
×
×
  • Create New...