Jump to content
SAU Community

Recommended Posts

Brake Rotor, $30, it has machined, 3 times machined left, $30

Roger Speaker, $120 very top sound, Drop to $100

PowerSplirit Power Stable Equipment $30 Drop to $20

Unversal A-Pillar Pod 60mm $20

OEM ignition coil packs with HKS plugs(used) $100 Drop to $80

Great condition for full packs and checked volt already, you can offer for Ignition only

Brake Rotor, $30, it has machined, 3 times machined left, $30

Roger Speaker, $120 very top sound, Drop to $100

Unversal A-Pillar Pod 60mm $20

Whiteline Front adjust and Rear adjust swaybars $460 (100%new and still in bag)

Z32 AFM $199 (Same as new and tested in perfect condition)

  • 2 weeks later...

Hi mate, have pm'd before about seat. Are these coilpacks in 100% working order? ive been having troubles getting a good quality 2nd hand set. Just pm me back :blink: interested in both seat and packs providing they suit.

  • 3 weeks later...

hey mate gimme ur mobiles or home number so i can come get the skirts off ur hands asap and the steering wheels if u got em and also the front bar asap!!!!!!!!!!!!!! or my number is 0416337372 just let me know wot ur texting me about tnx



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...