Jump to content
SAU Community

Recommended Posts

hey all im trying to keep my car as legal as possible. im planning on taking my car over the pits or doing watevas needed to obtain permits for a few of my mods and future mods (ill take the car over when im finished them) like strut braces, gauges, catch can and exhaust, should i get my permits before the hicas lock bar as it might fail? reason is that i want a hicas lock bar asap on my car, but i wont be able to fninsh off my mods i want permits for until maybe a month when i have money.

has any1 passed with a hicas lock bar installed? ill try to keep it looking stealthy by painting it black, hiding all the wires and taking out the hicas globe.

Link to comment
https://www.sau.com.au/forums/topic/260673-will-a-hicas-lock-bar-pass-pits/
Share on other sites

They will only not pass or take the sticker off for things like car is too low, suspsension too stiff, too loud, oil leaks in engine, locked diffs.

They are unlikely to see the hicas bar, shouldn't fail u for that. but if paint it, 100% pass. mine passed with one

I took my car over the pits recently for mod permits and got knocked back because of mine. They said if its factory fitted then it needs to be there and needs to work. As no one can say a HICAS breaker bar is up to ADR standards it cant pass. I personnaly think its a load of shit and i was unlucky. They said if i can get a leter from a suspension specialist saying the HICAS breaker bar is safe and that HICAS is not needed then i can have it. Im gonna paint it black, throw some mud on it and try somewhere else.

I passed with mine but I also heard a guy got given a sticker for one not long ago.. not sure what happened at the pits about it though.

This is 100% correct. Car went to pits for other reasons (Too lows, cracked windscreen and small stuff) and the inspector picked the locked bar and said it was not legal and a genuine rack needed to be fitted. I installed a factory hicas rack and the car was then passed.

I think it was an isolated incident but be warned, it could happen if you get a certain inspector.

just a quick question on getting permit mods

If you go down to the pits to get them and get knocked back for say too low or exhaust to loud will they sticker your car and ask you to fix them?

sorry for going off topic a bit here.. but i have been thinking about getting permits before i get a yellow haha...

just a quick question on getting permit mods

If you go down to the pits to get them and get knocked back for say too low or exhaust to loud will they sticker your car and ask you to fix them?

sorry for going off topic a bit here.. but i have been thinking about getting permits before i get a yellow haha...

This is exactly what i did and they found somethings. I wasnt yellowed. They put all the things on the form that needed fixing and said come back when i have got it done. Never gave me a time frame.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...