Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

I told him you might be unavailable due to hospital stuff, he wasnt worried, he will keep calling till he gets you.

Got back from hospital now. She is on some new pain killers and looks a lot better :P

the awesome part of that is that her husby got appointed as a director of our department, alongside 2 other directors of the old departments, so he gets paid lots but doesnt need to know anything about either department. I guess though to be married to Captain Blight i would want a pretty good sweetner too.

Definitely. But remember to use preferences when voting for greens, they preference to labour :P

Preference to pirate party, sex party, gamer party, and basically everyone else instead.

No I mean. You take my vote, and do it yourself. I'm not voting.

slap slap slap

Well it's going to happen eventually anyway. If not by this one, by the next one. So it's really not worth giving up part of my day and going to a school ON A WEEKEND (if it was weekday and there was JB I'd at least consider it) and wasting my time drawing on paper.

Plus I know NOTHING about politics and refuse to be one of the people who just goes in and donkey votes and screws up the system.

Well it's going to happen eventually anyway. If not by this one, by the next one. So it's really not worth giving up part of my day and going to a school ON A WEEKEND (if it was weekday and there was JB I'd at least consider it) and wasting my time drawing on paper.

Plus I know NOTHING about politics and refuse to be one of the people who just goes in and donkey votes and screws up the system.

What difference does weekend/weekday make to a jobless bum? :P

howdy

huge morning for old tristan

- wheel alignment with roy

- 2nd wheel alignment with roy (3.5camber made my rim rub on coilover) so now 2.5camber - considering looking for some 2mm spacers if i want to try 3.5 in the future

- new wheels fitted with tyres and balanced

- daily is now insured and in transfered the rego

- i has coronas in the fridge cuz my gf is f**king rad and got me some before

- have another 1000words left in my assignment

SUP WITH YOU GUYS?!

Uni is gaids. Estimating is boring and my lecturer sucks donkey dick. I have proof.

Lol, TRD is tuning everything these days

Hopefully we wont have too many vehicles with dodgy accelerators and dangerous floor mats.

I really need some brakes, as Anna wants mine for the sil80, im thinking R33 brembos, but my mate works for a v8 ute racing team and they run alcons....but would need adapting.

hmm not sure what direction to take, this car has been all about enhancing rather than re-engineering so a bolt on fit does appeal, just not sure they will be enough though!

34 brembos or have a look at the K sport brakes? Decent budget upgrade that is being used by a few people on here without any problems.

Atomicbomberman had some impressive brembo brake calipers with him one night. Ferrari ones or some such. Dan or Martin might remember. He was putting them on his 32GTR and they looked like MORE than enough.

They were 8 pot brembos off a corvette if I remember correctly. He has 360 brakes for the rears.

I missed far too much and was going to quote everything and make an epic post but cbf now. So I'll just say Anna Bligh is f**king retarded and uni is gay.

What difference does weekend/weekday make to a jobless bum? :laugh:

Yeah I don't get it. Whenever I have holidays it takes me about 3 days to forget what day of the week it is. :P

Well it's going to happen eventually anyway. If not by this one, by the next one. So it's really not worth giving up part of my day and going to a school ON A WEEKEND (if it was weekday and there was JB I'd at least consider it) and wasting my time drawing on paper.

Plus I know NOTHING about politics and refuse to be one of the people who just goes in and donkey votes and screws up the system.

What difference does weekend/weekday make to a jobless bum? :P

I put it in there originally for the sole reason you wouldn't need to ask why a weekend/weekday was any different.

Attn Gay cowboy aka josh:

I haven't done a cambelt in a 355 but i have seen it done, you will need a hoist and a frame. Removal of the engine and rear suspension subframe is the fastest way to do it, also the easiest, in 360 and later you can remove a panel behind the drivers seat to change the belt. I can give you some names if you want it done for cheap

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...