Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Nice stuff Dan

Evening all!

Anyone care to help, tell me about subframe bushes? I have clunks that have been there since I bought the car, I'm narrowing it down to the tailshaft/diff area, or possibly subframe bushes, based on what I've read.

How many bushes are there? Where are they, what is required to change them?

the bushes that hold the subframe to the body? or the bushes that hold the various suspension arms/diff onto the subframe?

could also be the tie rods or rack ends of the hicas setup. If its the subframe bushes themselves you'll next an oxy and a hacksaw

Ok, well I'll start with the easiest options first I guess.

Would the bushes where the arms etc join the subframe be the easiest place to start out of those options?

get under the back with a long screw driver or pry bar and try see what moves around too much, thats the best way to start looking, otherwise you just start throwing money away on things that don't need doing yet.

Photo1091.jpg

the end result of my work, its running R33 turbo calipers on the front now too.

Morning Mangs,

Boring weekend was boring. Wanted to wash the car but it wouldn't stop f**king raining. Stupid weather.

End.

Morning Mangs,

Is it Christmas Newtonmas yet? No, f*ck. Two weeks of work left :(

Fuck our country: http://www.theaustralian.com.au/australian-it/r18-adult-rating-for-pc-games-rejected/story-e6frgakx-1225969108337

And fuck the America:

get under the back with a long screw driver or pry bar and try see what moves around too much

That's what she said.

otherwise you just start throwing money away on things that don't need doing yet.

That's what she said.

the end result of my work, its running R33 turbo calipers on the front now too.

That's what she said.

That looks the same height all around

That's what she said.

Boring weekend was boring. Wanted to wash the car but it wouldn't stop f**king raining. Stupid weather.

End.

Solution to being bored: GT5.

End.

Mate doesn't have a PS3 and Lee would throw a shitfit if I tried to take the PS3 away lol. Have to wait until my mate sees the light and decides he needs a PS3

Mate doesn't have a PS3 and Lee would throw a shitfit if I tried to take the PS3 away lol. Have to wait until my mate sees the light and decides he needs a PS3

I'll trade you a PS3 for your sister. I'll even throw in a copy of GT5 ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
    • Thanks guys - I have been overseas for a hectic many weeks , so haven't had time to chase any of these up.  Some of the suggestions are for 4.1 ratio, which I already have, and a 3.5 at Lonsdale, which is also too tall.  Really looking for 3.9 or even a 3.7 LSD, either with M12 bolts. Will look some more.  
×
×
  • Create New...