Jump to content
SAU Community

Recommended Posts

I was so looking forward to the track day at Eastern Creek this Saturday. But my GTR has developed a sputter above 5k RPM and neither I or the shop have figured it out yet (shop's been looking at it since Monday).

So there is a very high chance I will have to sell my spot. I'm looking for someone who is interested in my spot and willing to be my "back-up" for the day. If my car isn't ready to go by Friday afternoon then I'll call you and Martin to confirm.

My loss may be your gain. If I have to pull out, I'll sell you my spot for $200 to recoup some of the loss.

Not many times you get a chance at the Creek for $200! Looks like the weather is going to work out too!

Here's my number 0419 468 835

<Very Bummed - this was going to be the first outing with fully working atessa>

So now open to all offers! My car won't be ready, the ECU is having issues so has to be sent out for repairs.

Guys, make me any offer - the spot is up for grabs.

First one over $150 gets it - that's almost 1/2.

Just got off the phone with a member here who took the initiative to show up at the track this morning and sorted it all out. (I was so depressed I turned off my phone and went to bed at 10:30 last night). Good on ya!

I'm still spewing that I didn't make the day. It would be glorious - look at the weather!

Hope you fair well today bud!

Sorry for you missing out on a great day man. I was there today, unfortunatly I didn't put my car on the track beacuse of my broken leg, but I still went walking on my cratches and watched the skyline guys taking on ferraris, M3's, an M5 and many supras, evos, and wrx's. It was a great day man. Hope to see you on the track next time :D



  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...