Jump to content
SAU Community

Recommended Posts

Hey all,

after bein messed around by a couple of indeviduals, i have decided to bite the bullet and do the work to get my NEO properly assembled so it can be sold.

ITEM: 60,000K RB25DET NEO. appx engine km's but has been completely freshened up.

CONDITION: engine has been stripped down to the rotating assembly. the main & big end bearings were checked and were like new so not replaced. pistons are in perfect condition and same with all 6 bores. Head was removed and mechined stripped checked and re assembled to block with new genuine headgasket. comes with practically new intake & exhaust gaskets. Timing belt done appx 20,000K's so wasnt replaced as it will still be good for long time.

INCLUDES: Assentially its a complete engine with no bolt on acc's. comes with 2 EXH manifolds, complete NEO Intake manifold. STD solid lift NEO cams, cam covers timing covers and anything else i have for it.

SELLING BECAUSE: Bought to rebuild and put into my r33 but have since then decided not to change my engnie in my car due to financial issues.

Engine is in SE suburbs of victoria but can easily organise postage. PM me if you want any photo's or have any questions.

THIS IS THE CHEAPEST RB25NEO turbo engine you will find ANYWHERE>

grab a bargain.

Contact me on 0423130616 if you have questions

Link to comment
https://www.sau.com.au/forums/topic/262932-fresh-assembled-rb25-neo-det/
Share on other sites

can i just take the head for 500? PM me asap. i've been looking at it for years! thanks

sorry mate but ive allready had a bloke in the states asking for the head for $800 aus. if you can find someone who wants all the other stuff for $500 then i will part it out. but 500 for the head isnt enought man, ive just spent a few hundred just on head machining. then the genuine head gasket is wnother 100.

lemme know wat you wanna do.

lol, i think i know the guy. he bought an RB25DE head from okinawa rather than RB25DET.

you've got a PM.

not sure where he found the other head but yeah, he got the wrong one.

PM replied too.

Anyone interested in the Short engine??? which is the rotating assembly but with no head on it. can sell that for $300 if anyone is interested.

Also have a HKS EXH cam gear. adjustable. $150ono

How come people send a PM then never repluy after i try to contact them???

someone buy this engine, i no longer have use for it.

nothing to do mechanically to it, just bolt on your acc's and drop her in the hole.

Thanks for your concern on the price mate and i really appreciate you trying to make other forum members think im dodgy. (please sense my sarcasm)

Just for the record and for everyones knowledge, previous thread price was before engine machine work+ New Gaskets from nissan + timing cases &other spares.

Im a mechanic and know what motors in good condition are worth, if your not interested please look somewhere else.

  • 1 year later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...