Jump to content
SAU Community

Recommended Posts

RB20 complete motor, perfect working, out of my car so i know its sweet i.e. its not a motor that has been imported and sitting in the weather for who knows how many years. complete with manifolds, injectors alternator, loom and computer basically just EVERYTHING to drop in and go. could most likely get a g/box as well if required.

The motor has 120 xxx k's on it and compression is all good. i tested before i pulled the motor out, quite a while ago now though so i've forgotten exact numbers.... from memory all cylinders were only had a couple of psi variance.

$600

Call/sms or pm for any enquiries on 0422034450

I would prefer if you contact me by mobile but pm if need be.

Ryan

Link to comment
https://www.sau.com.au/forums/topic/263854-rb20det-complete-for-swap-or-sale/
Share on other sites

hay mate,

do u still have the rb20det for sale?

if you do just a couple of questions is it a silver top or red top?

does it come with turbo,manifold,lines,cooler piping and front or dump pipe?

im not time waisting because in need of a motor because i poped my rb30et

thanks, michael

lthl31.

Its a silver top. It does include manifolds. Only thing it doesn't have is coilpacks and turbo.

If you are serious about buying i think i have a dump pipe and a standard cooler with piping kicking around i could chuck in as well.

Any further questions message or call me on 0422 034 450

Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...