Jump to content
SAU Community

Recommended Posts

My battery has died which is not surprising as it came with a puny 305CCA and was second hand as well (typical dealer install).

There are no listings for the front mounted battery (import) and the listed battery has the terminal on the wrong side which can't be used without cable changes.

I have only found the "Supercharge" brand that has a decent sized battery (450 CCA) with the thin terminals on the correct side and with dimensions that will fit but haven't found any shops that carry them so what are you guys using?

Any help appreciated. Mark.

Link to comment
https://www.sau.com.au/forums/topic/265077-battery-size-for-r34-sedan/
Share on other sites

Gday mate, I just had to replace the battery in my 34. It takes a 380cca. I got mine from battery world.

Its a super charge, part number is MF40B20L.

Hope that helps.

Thanks Jason,

I'll try Battery world on Tuesday as the usual shops around only have up to 305CCA in the smal terminal batteries.

Supercharge also list a bigger battery (450CCA) with the smaller terminals but I'm guessing it will be overkill and overpriced.

Cheers, Mark.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...