Jump to content
SAU Community

R34 Gtr V Spec Ii Engine

MLCrisis
 Share

Recommended Posts

MLCrisis Proficient

MLCrisis

Posted
Posted (edited)

I am selling the engine from my R34 GTR V Spec II. I am upgrading to a monster motor. This engine has travelled 55,000 km's and will be sold complete from intake plenum to dump pipes. It is immaculate, as I have looked after it fastidiously - as those of you who have seen the car at AutoSalon and elsewhere will know! :D

History: I imported the car from Japan in early 2007 via a well-known Perth-based import specialist. They did all the compliancing and subsequent servicing. The service history is all logged and receipts/dates and reports will be provided to validate condition. The engine was serviced every 5000 km's and only the best oils and lubricants were used.

Engine comes with:

Injectors

Coil packs

Turbos

Steel dumps

R34 Crank angle sensor (will be modified by the workshop to suit earlier model if required)

All engine pipework

Fuel rail and pressure reg

Nismo Oil cap

The engine is currently stored at the workshop, who will guarantee its condition to any buyer. The workshop can provide fitting service to buyers from Perth. Shipping inter-state can be arranged at buyer's expense.

Price: $8,800.

Please don't post telling me you can buy a wrecker from an R32 of unknown origin for heaps less. This is a good price for a known history engine that is absolutely immaculate. Independent inspections welcome.

Cheers. :P

post-1887-1239698494_thumb.jpg

post-1887-1239698522_thumb.jpg

post-1887-1239698534_thumb.jpg

Edited by MLCrisis
Link to comment
https://www.sau.com.au/forums/topic/265450-r34-gtr-v-spec-ii-engine/
Share on other sites
MLCrisis Proficient

MLCrisis

Posted
  • Author
Posted
which shop is this located at in perth and what are you putting in?

Short version - it's a Nismo crate R34 GTR N1 motor, with HKS V-Cam and all the trimmings. The whole deal is being managed for me by Imports 101, who imported the R32 from Japan earlier this year. The bits that won't fit, I am selling. The workshop is keeping the rest of the R32. :blush:

Cheers.

Tonkachow Collaborator

Tonkachow

Posted
Posted (edited)

If you can find anybody who wants everything else I only need the bare motor. Would be interested at a revised price minus those things,if there is anyone out there???

Edited by Tonkachow
MLCrisis Proficient

MLCrisis

Posted
  • Author
Posted
If you can find anybody who wants everything else I only need the bare motor. Would be interested at a revised price minus those things,if there is anyone out there???

Thanks, mate. I will see how it goes and in the meantime, prepare a price for the bare motor. Obviously I would prefer to sell it as a package.

Cheers. :P

MLCrisis Proficient

MLCrisis

Posted
  • Author
Posted
Short version - it's a Nismo crate R34 GTR N1 motor, with HKS V-Cam and all the trimmings. The whole deal is being managed for me by Imports 101, who imported the R32 from Japan earlier this year. The bits that won't fit, I am selling. The workshop is keeping the rest of the R32. :P

Cheers.

Just in case anyone is confused - I am putting the Nismo crate motor with the V-cam into my car. The standard R34 GTR V Spec II motor is for sale!

Cheers. :thumbsup:

MLCrisis Proficient

MLCrisis

Posted
  • Author
Posted
If you can find anybody who wants everything else I only need the bare motor. Would be interested at a revised price minus those things,if there is anyone out there???

PM sent. Still would prefer to sell whole package. :down:

Cheers.

MLCrisis Proficient

MLCrisis

Posted
  • Author
Posted
Would u sell the head and plenum seperate?

Thanks for the enquiry, mate. I really don't want to break this down. The motor is guaranteed as a package by the workshop who are doing all the work for me. So this is not your average RB26 from a front cut or a wrecker. Someone will want an engine with such a guarantee, I am sure. So it is not worth it to break it down.

I am sure you can get a head and plenum elsewhere. Try some of the workshops - I can give you the details of the workshop I am using, if you send me a PM. They may have what you are looking for, without my engine attached!!

Cheers,

Brendan.

MLCrisis Proficient

MLCrisis

Posted
  • Author
Posted

Just a thought for those of you who are window-shopping: There cannot be many RB26 motors for sale out there that come guaranteed by a reputable workshop and with a known history.

Just a thought .... ..... ..... ;)

MLCrisis Proficient

MLCrisis

Posted
  • Author
Posted
any chance of getting it over to the east coast?

We can get it shipped to the East coast, no worries. Several of the freight companies, such as Smartsend, can give you a quote online for sending an engine. Let me know if you need me to get a quote - but you will need to tell me where you are and which post code it needs to be delivered to.

Also pm sent.

any chance you can supply a matching engine loom?

i may have a buyer.

steve

Steve, I will check with the workshop. I take it you are looking for a BNR34 wiring loom - is that correct? Also, please let me know where you are - it may help if you came into the workshop to discuss your needs. Otherwise, send me your mobile number via pm.

Also pm sent.

Cheers. :)

MLCrisis Proficient

MLCrisis

Posted
  • Author
Posted

Just to confirm, for those who are window shopping: ;)

  • Freight of the motor from WA to the East coast would cost between $250 and $350, depending on where you are. All pretty straightforward.
  • Regarding the engine loom, I can provide an engine loom, if required - with suitable modification for the CAS for R32 or R33 cars. It will cost me, so I will have to pass on the cost - will need to check price, depending on the model and CAS. I am using my BNR34 engine loom in my car. I am advised by the workshop that you can happily use an R32 or R33 engine loom with this motor. Running an R32/33 loom even provides some benefits, as this allows you to use any readily available ECU, where as the BNR34 one is harder to get, less options and more expensive. This engine and loom will run off a STD BNR32 or BCNR33 computer and loom with no trouble.

Hope that helps.

Cheers. :blush:

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • Kinkstaah
      My BMW E39 528i touring

      By Kinkstaah · Posted

      @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...