Jump to content
SAU Community

Renovating House And Would Like To Help Out Sau Tradies

CEF11E

By CEF11E,
in Victoria

 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

Hey All,

well I am going to be doing some renovations on my house and need good reliable tradies and I thought seeming as there is such a big community on SAU and times are a bit tough I would ask here first incase anyone wants work.

I will need a sparky to install an IXL tastic and about 6 downlights and possibly sort out some 15amp power for my garage. not really a big job but can make is a weekend cash job if needed.

I will also be knocking down some small sections of wall, about 2 metres by 1 metre. I have been in the roof and am not sure if I will have to have reinforcements put in.

Also will be ripping up the carpet in the whole house and having the floor boards sanded and sealed

I will also be replacing the kitchen doors and bench.

so if you are a licensed tradie and are on sau and are interested let me know and send me a PM.

I am very handy and can help with any of the work. Also if you need any mechanical or tuning work done I can help you. we could do a sort of a trade.

Cheers!

GUN_METAL_GTR32 Grand Master

GUN_METAL_GTR32

Posted
Posted

i have a couple tradies mates that can help if u want ill ask them to call you

pm me ur details and ill ask them.

i know a painter, sparky and a plumber so tell which ones u want and ill call them tonight when i get home.

cheers

julz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Bwagz
      Engine model

      By Bwagz · Posted

      I bought an engine from a friend of a friend many years ago, it was sold to me as a RB25det Neo.    recently I started pulling it apart and noticed that the intake manifold was pretty different from others that I had seen on RB engines so did a bit of research and found that it was a non turbo manifold. So I’m sceptical now that it is a NEO DET and just thinking it’s a NEO DE (it does have a turbo strapped to it currently).    can you identify the engine model from the numbers on the block?
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      Yeah you can. Cable tie the gauge to a windscreen wiper, or run it into the car and hold it with one hand, or have the neighbour's kid run alongside and tell you what it says.
    • GTSBoy
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By GTSBoy · Posted

      I've never understood why this bothers people. Surely you'd be looking at a T3 flanged Garrett style thing, rather than a TD? You're unlikely to push a +T hard enough to need that much fuel. If you're not starting with most of the things you need to do that (ie, the bloody ECU!), you're better off just going Haltech/Link. You wil hate life a lot less. No. Just no. Just turbo it as is.
    • Zowan
      Rapid-fire squeaking/creaking from rear suspension

      By Zowan · Posted

      Have you noticed if the squeak changes with temperature or after driving in the rain?
    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
×
×
  • Create New...