Jump to content
SAU Community

Recommended Posts

what colour is your r32 ?

i was up there last weekend and saw 3 :). i go up there regulary to visit the women ... so you might see me around there.

i stand out up there amoungst all the holden's and fords . . .

yeah ya wood lol there are a few r32s and r33s and even seen a r35 gtr geting round red with number plate r35gtr. ill keep a look out for ya

myn is a purple one gtr front bar dosnt get out much tho

Edited by mr turbo
not called the spud train anymore?

theres both :P

spud box is owned by my mates step dad, and the spud train is the next lot up on the corner at the other tyre place hehe. tho i havnt seen it there for ages

spud box ?

BeauRepairs after hours, he works from the car park, across the road from KFC, less wait and more filling then greasy KFC with a 500m lineup for drive through ! BAH

lo yeah gets bad as somtimes cars lineing up out on the highway

spud train aye ? might go hunting for that one.

my wagon should be empty Dezz if your need anything taken up there or brought back that wont fit in the 33, just aslong as their not breathing its A.O.K

heheh thanks for the offer...but my cousins own a fruit shop up there...so the semi trailer that they bring to melbourne 2-3 times a week is usually big enough to carry anything I need :P

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...