Jump to content
SAU Community

R34 Engine Light

r34 gt25

By r34 gt25,
in General Maintenance

 Share

Recommended Posts

r34 gt25 Collaborator

r34 gt25

Posted
Posted

hey guy

i was just driving home from the local shops and my engine light come on i have just changed the coils and my

car has no miss fire wat so ever car seems fine but the warning light has come on

has anyone had this problem wat could it be and my engine light is staying on (no flashing).

Link to comment
https://www.sau.com.au/forums/topic/271020-r34-engine-light/
Share on other sites
cosmic starz Collaborator

cosmic starz

Posted
Posted
hey guy

i was just driving home from the local shops and my engine light come on i have just changed the coils and my

car has no miss fire wat so ever car seems fine but the warning light has come on

has anyone had this problem wat could it be and my engine light is staying on (no flashing).

-------------------------------

you've put up several posts now about this but clearly have not taken any previous advice on board - if you had done so by now you would know that you have to jump two pins on the engine diagnostic connector to get the flashing code which tells you what the likely problem is - takes about 1 minute, like I said some time ago - but, hey if its too much trouble to do its best you just keep wildly guessing.........and guessing ..........and posting some more ......lol

  • 2 months later...
REDGTT Grand Master

REDGTT

Posted
Posted
hey guy

i was just driving home from the local shops and my engine light come on i have just changed the coils and my

car has no miss fire wat so ever car seems fine but the warning light has come on

has anyone had this problem wat could it be and my engine light is staying on (no flashing).

Engine light on means one of the sensors have failed and giving out an incorrect voltage reading or none at all.

The flashing will only take place when you do a self diagnostics to get the exact sensor code.

Hook up nissan datascan with the cable which you can purchase or take it to nissan for them to hook up the consult.

Free way is do the self diagnostics for the ecu.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Ahh. Well the block damage is a problem, you really need to run a tap or thread chaser through it to see if the threads can be saved, but any chips are likely to be bottom end bound which is bad. Earls seem to have what you need if you want to stick with mounting direct on the block: https://rceperformance.com.au/parts/earls-straight-adapter-1-8-npt-male-to-1-8-bspt-female.html, but as I said above I'd recommend remote mounting the sender
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
×
×
  • Create New...