Jump to content
SAU Community

Recommended Posts

Hey, guys:

I got a GTT ER34, with a little modification here is the list:

HKS Air filter

HKS Hypermax 3 Coilover ( only been used by 2000km)

HKS Catback High Power Exh

HKS Turbo Gauage

D1GP steering wheel (deep dished)

Nismo gear knob ( and a short shift gear shifter, but I didn't put it on)

FMIC and pipeing kits

REAL "Bride Full Bucket Racing Seats"( a Pair, both driving and passenger sides, including real bride seat rails, these 2 seats and 2 seat rails cost me $3000+ just been used 2000km, so almost brand new)

Ignition button

Rays TE37 18 inch Rims (but this is copy, not real, however, the performance of Rims is pretty good)

The car only been drived by 68000km, fast and fun, except all above parts, there are some other performance parts for example: tension rod, strut bar... I won't list them all.

I purchased this car in 2008 Jun, by $18000 without and modification, I put more than 10000 to modify this car in profeesional mech's work shop in Clayton. Now, because some reasons, I have to leave Australia for a long period( probablly 3years), therefore, I want to quickly sale my car. Because of the time , I do not have time to do RWC for you, but I can introduce my friends' work shop to you, he can do RWC for you, and no more than $300.

I plan to sale the car by $18000 directly, if you want me drop the price, I will remove some valuable aftermarket parts from my car, and put the standard one for you. Also, if you accept this price, I will give you all standard parts for free.

Because I really hurry to sale the car, so I made $18000 for my lovely car, that almost be the lowest price in carsales, but if reasonable bargin, I will consider to accept that.

Finally, I am a Chinese international student, and I worried about my family now very much, so I do not want to bargin too much, and also I do not have time, give me your offer, we disscus.

Now, I put some pictures:

( I do not know how to post pictures, emailed me I will email you my pictures)

My name: Jason

My Mobile: 0404 999 874

My email: [email protected]

Edited by gtt34ren

The above link is my gtt's picture in a Chinese forum, and at that time, my gtt is still tunning, but now, has finished.

You guys can have a look the engine bay, it is pretty clear, and some interior modification parts has been putted there, but I do not want to list them all, because when you drive, you just can feel that!!!

I will shoot more pictures these few days, but please understand me that I do not have enough time to do that, I am preparing go back to China.

And the MOST IMPORTANT is : THIS CAR CAN GO TO TRACK Directly!!!!!!!!!!!!!!!!!! READY TO GO !!!

Also, I modified this car not in a common workshop, a professional NISSAN Mechanics (who is Japanese) modified this car, I can promise this car has been modified profeesionally!!!!!!!!!!

Guys, Modification is not only the matter of money and time!!!! Modification is a SkILL, a Arts!!! So, even there are not lots of aftermarket parts( actually not very less, but not large mount number of parts), but more professional than what you ever saw skyline gtt er34 on road, please trust me

Damn. I'd be interested to look at it but Melb is too far for me.

Good luck though.

Advice: Sure you might save time not giving info, but then you're taking up everyone else's who have to chase things up. :) Help others help you.

No worries, hope someone in Melbourne would like this car, seriously this price is not expensive right? Because I have looked carsales price of my model.

I made the lowest price, just for quick sale.

And I think, I have put a lot of info about this car? just, I do not want to do RWC, if you think that will make you inconvenient, I can drop some price, because I will provide all standard parts of this car :D So, RWC won't be cost you much, I have quote a price, around 300 dollar. But I really have no time left, cause I need to back to China soon, I have to finish all other things before I leave, so please understand my situation.

If I am not going back to China, I won't rush to sell my car at this price. :)

hey mate,

Car looks really nice, can you post up some more pictures of it from the outside and inside if everything is put together and complete? Will be very interested if its still around in a month or two :ermm: free bump

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...