Jump to content
SAU Community

Recommended Posts

Hey all,

I have some RB26 engine parts from a 32GTR that I'm selling. So if your interested in any of the gear below send us a pm!

ALL PARTS LOCATED IN ADELAIDE AND AM WILLING TO SHIP @ BUYERS EXPENSE

-34 Intake plenum $100

-intake manifold assay(injector plate) $400

-Throttle bodies + linkages $350

-Injectors + fuel rail + reg $250

-Rocker covers + front cover + valley cover $400 (painted in red)

-Front cover backing plate + vac lines $50

-R32/33/34 wiring loom $450

-Head ( with cams, cam gears, valves, lifters etc) $1200

-R32 Crank $300

-Crank girdle + crank scraper $150

-Block (has some scuff marks from ring land failure) $200

-2WD gtr sump conversion $300

-Power steering bracket $20

-Crank pulley X2 $50 each

-coil packs $150

-Oil filter assay(water cooled) $150

-Turbos( the pair, with dumps, exh manifolds etc) $500 the pair

-oil/water lines for turbos $100

-AAC valve + vaccuum lines $200

-Air regulator(for idle control) $100

-Throttle valve switch $80

-R33 centre grill $100

-R33 Front bar (N1 look-a-like) $200

-Twin turbo connecting pipe X2 $30 each

-Stock exhaust manifolds $50 the pair

-CAS (cam angle sensor) + backing bracket $200

-Alternator $80

th_rb26parts027.jpgth_rb26parts028.jpgth_rb26parts033.jpgth_05302009106.jpgth_05302009105.jpgth_05302009097.jpgth_05302009096.jpgth_05302009102.jpgth_05302009095.jpgth_05302009094.jpgth_05302009074.jpgth_05302009073.jpgth_05302009075.jpgth_05302009076.jpgth_05302009078.jpgth_05302009079.jpgth_05302009081.jpgth_05302009083.jpgth_05302009084.jpgth_05302009085.jpgth_05302009086.jpgth_05302009087.jpgth_05302009092.jpgth_05302009091.jpgth_05302009090.jpgth_05302009088.jpgth_05302009103.jpgth_05302009100.jpgth_05302009101.jpgth_05302009099.jpg

Link to comment
https://www.sau.com.au/forums/topic/272590-rb26-engine-parts/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

-Injectors + fuel rail + reg $250

Hey buddy,

What condition are the injectors in? If all good ill prob take em.

Also do you have the dropping resistors for the injectors?

Cheers

Edited by Sports Crazy
Hey all. If you need a part atleast make a serious offer and no low balling!!!

Send us a pm for any of the remaining parts!!

ill pay full price for the block and crank if the girdle is supplied for free.

ill pay full price for the block and crank if the girdle is supplied for free.

Tried to send PM but your inbox was full! Will sell you the complete package comprising of Block, Crank, Crank girdle, mains caps,

mains studs and crank scraper for $700 (the $200 is for postage - due to the size and weight of the package I have to have it

couriered to you) If you like this offer send me a PM and we can organise payment and delivery!

Edited by huli

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...