Jump to content
SAU Community

Safc Ii + Z32 Afm, Buy One Or Buy Both.

NZM.031
 Share

Recommended Posts

NZM.031 Grand Master

NZM.031

Posted
Posted

hey guys,

im returning my r32 back to stock.

i bought the SAFC II brand new in 2005, i used it on my r33 for a few months, then put it back in the box, i used it for a brief period on my missus' 4AGE corolla for shits and giggles for a week or two, then back in the box, then dug it out again to put on the r32 to run the Z32 afm.. it is in perfect working condition, and the unit itself is immaculate, i have most of the manuals, and the original box somewhere (just moved so not sure where), however all can be found on the Apexi U.S. website.

i bought the Z32 afm and plug from CRD in Dec 08.. still have original box and receipt from CRD.. it is in new condition, and was mounted solid with a bracket, hasnt been flogging around.. comes with plug to suit.

$300 each or $500 for both. items located in East Maitland NSW, but can post ANYWHERE COMPLEMENTARY (thats for free)

DSC00075.jpg

DSC00074.jpg

DSC00071.jpg

DSC00073.jpg

cheers

Linton

Link to comment
https://www.sau.com.au/forums/topic/272814-safc-ii-z32-afm-buy-one-or-buy-both/
Share on other sites
  • 4 weeks later...
  • 4 weeks later...
Japanese dino Rookie

Japanese dino

Posted
Posted

Call me in regards to the Apexi s-afc 0414 335 485

Regards

Gerry

hey guys,

im returning my r32 back to stock.

i bought the SAFC II brand new in 2005, i used it on my r33 for a few months, then put it back in the box, i used it for a brief period on my missus' 4AGE corolla for shits and giggles for a week or two, then back in the box, then dug it out again to put on the r32 to run the Z32 afm.. it is in perfect working condition, and the unit itself is immaculate, i have most of the manuals, and the original box somewhere (just moved so not sure where), however all can be found on the Apexi U.S. website.

i bought the Z32 afm and plug from CRD in Dec 08.. still have original box and receipt from CRD.. it is in new condition, and was mounted solid with a bracket, hasnt been flogging around.. comes with plug to suit.

$300 each or $500 for both. items located in East Maitland NSW, but can post ANYWHERE COMPLEMENTARY (thats for free)

DSC00075.jpg

DSC00074.jpg

DSC00071.jpg

DSC00073.jpg

cheers

Linton

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ToothDR32
      $5 Clock upgrade for R32 GTR

      By ToothDR32 · Posted

      Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...