Jump to content
SAU Community

URGENT. Need Power FC controller for R33 GTS-T TODAY

borry

By borry,
in Engines & Forced Induction

 Share

Recommended Posts

borry Enthusiast

borry

Posted
Posted

Hi all,

My stock ECU failed during an attempt to try and place a piggy back unit onto my "stock ecu". its was later discovered that my ecu wasnt stock and the piggy back ecu decided to destroy it! So now ive placed a Power FC in my car but do not have a hand controller to configure it.... my car is a Unigroup Engineering and the guys are pretty desperate to get my car out today as they have so many other jobs on their hand at the moment. The are offering a free dyno run if someone is kind enough to lend them a contorller for 1 to 2 days. On top of that i will leave a FULL deposit on the controller and return it back to you stright after they are finished working on it (monday night 20th) + ill pay u $100 just for letting me hire it.

Please can someone help today? id so please call me on the number below, i can pick up anywhere in sydney.

ps my car has been out of action for over 1 week and its painful :(

thanks

Borry

0416290201

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      New R32 owner soon

      By joshuaho96 · Posted

      Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • niZmO_Man
      R32 Nostalgia

      By niZmO_Man · Posted

      From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • niZmO_Man
      New R32 owner soon

      By niZmO_Man · Posted

      Remember this is 1988 tech.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
×
×
  • Create New...