Jump to content
SAU Community

Recommended Posts

Can send anything interesate or pickup in Adelaide.

S15 SR20DET Engine Package from Auto S15. Complete Loom, Engine, Coils, AFM, ECU. Only missing turbo. $2700

S15 Passenger Seat + Rails $250

S15 SR20DET Auto Gearbox Complete $200

S15 R200 Diff from 6 Speed Manual $350

S15 R200 Diff from Auto $300

S15 Bare Rear Cradle $200

S15 6 Speed Tailshaft $150

S15 Auto Tailshaft $150

S15 Dash Complete with all vents (missing passenger airbag panel) $300

S15 Rear 5 Stud Hubs/Uprights $200

S15 Door Trims Pair $200

S13 Half Cage + Padding $500

CA18 Manual Gearbox with shifter $450

S13 Shell, Track Only. Will negotiate on price depending if its a bare shell or rolling etc.

R32 GTR Passenger Seat + Rails $275

R32 GTR ATS 2 Way Mechanical Diff in housing 4.1:1 ratio $1100 ($800 center only)

R32 GTR 5 stud conversion (Callipers, Rotors, Front Hubs/Uprights, Rear Hubs/Uprights, Drum handbrake) $1050

R32 GTR Aragosta Coilovers (Height and Damper Adjustable, no leaks!) $1000

R32 GTR Bare Rear Cradle $200

R32 GTR Door Trims Pair $200

R32 GTR Tein Caster Rods $200

R32 GTR Rear Swaybar $100

R32 Bootlid $100

R32 Steering Rack, JIC Tie Rods $250

R32 RB20 HKS Intercooler Kit + Piping, Silicone $500

R32 GTS-t Bonnet with GTR style Lip $200

Oil Coooler Kit HKS relocator, All Earls Lines and Fittings, Toyo Core. Only missing sandwhich plate for engine $300

18x8 +38 5 Stud Starcorp Black Meshies 235/40 Kuhmo Tyres 80% tread! $1200

16x9, 8 4 stud Volk Black Center Meshies with Tyres $500

17x9 +15 Work Rims, Dish and Excellent 245/45 Wanli Tread off GTR. $1400

17x9 +15 17x7 +30 Gold Jap Rims $800 or $650 rear set

17x9, 8 Black 5 Spoke Veilside Rims $700

post-32765-1244184627_thumb.jpg

post-32765-1244184660_thumb.jpg

post-32765-1244184699_thumb.jpg

post-32765-1244184716_thumb.jpg

post-32765-1244184745_thumb.jpg

post-32765-1244184760_thumb.jpg

post-32765-1244184796_thumb.jpg

post-32765-1244184810_thumb.jpg

post-32765-1244184827_thumb.jpg

post-32765-1244184844_thumb.jpg

post-32765-1244184891_thumb.jpg

post-32765-1244184911_thumb.jpg

post-32765-1244184933_thumb.jpg

post-32765-1244184972_thumb.jpg

post-32765-1244185007_thumb.jpg

post-32765-1244185060_thumb.jpg

post-32765-1244185075_thumb.jpg

wot sort of condition are the tie rod ends? any play?? will u separate from steering rack? pm me price delivered to 3082

will it fit r32 gtr?

Edited by BWRGTR

Don't really want to seperate the ends from the rack, sorry. Can somone confirm is gts-t and GTR racks are the same?

Sorry, don't have the plastic inner guards.

Hey, really interested in the veilside rims,

Just wondering where abouts in adelaide you are?

Could you message me with contact details?

Thanks

Hi AX-onevia, money transferred for the R32 Coilovers.

Reciept in your inbox.

Cheers man.

  • 2 weeks later...

oh god dam it i was just bidding on your bonnet on ebay and some bloke outbid me in the last 2 seconds :P

  • 2 weeks later...

Hi Matt, it's now the 10th of July and I still haven't received the coilovers, can you please give me an update? I've paid for the parts 18 days ago now.

Thanks,

Matt

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...