Jump to content
SAU Community

Recommended Posts

not sure if i still need this

d/c the o2 sensor as recomended by a mech mate and the idle is smoother so it could be a dud o2

will keep it posted

problem is just a flat spot as the car is coming onto boost, not plugs or coilpacks and not grounding either

Link to comment
https://www.sau.com.au/forums/topic/273574-want-to-borrow/#findComment-4642431
Share on other sites

I have igniter and afm that ur welcome to try but am down south

cool thanks for that

bit busy with uni atm but if i get a chance i'll try to get there

can you let me know if your up launnie way with spare time please?

Link to comment
https://www.sau.com.au/forums/topic/273574-want-to-borrow/#findComment-4644319
Share on other sites

cool thanks for that

bit busy with uni atm but if i get a chance i'll try to get there

can you let me know if your up launnie way with spare time please?

Wont be up your way anytime soon m8 but i can post it up to you if your desperate :P

Link to comment
https://www.sau.com.au/forums/topic/273574-want-to-borrow/#findComment-4644474
Share on other sites

na i think i have narrowed it down to a bad o2 sensor

unplugged it and reset the ecu and it drives and idles much better

plugged it back in and it went crap again

where would be best to get one from? i'll prob use the el ford falcon one and cut and splice

repco? bursons? or other?

Link to comment
https://www.sau.com.au/forums/topic/273574-want-to-borrow/#findComment-4644653
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...