Jump to content
SAU Community

Recommended Posts

Car is in great condition with a genuine 82000kms. Since purchasing the car i have added a list of tasteful mods to give a great feel and awesome performance while still not attracting a lot of unwanted attention.

Aftermarket sideskirts,rear wing and rear pods,

R33 GTR seats,

Aftermarket steering wheel,

JVC CD/MP3 player,

12" sub with amp,

Fusion speakers,

Push button start,

2x shadow gauges for boost and water temp,

APEXI Multi Checker Engine Monitor (very rare),

Apexi SAFC,

Coilover suspension,

Adjustable caster arms,

NPC button clutch,

LSD,

17"Jap Spec racing wheels,

Drag spec 100mm thick front mount intercooler,

Alloy cooler piping,

Gates racing blue timing belt fitted at 80000kms,

Custom low mount T66 turbo,

38mm external wastegate with screamer pipe,

3" step up to 3.5" stainless exhaust,

Adjustable fuel pressure regulator,

Walbro 550hp fuel pump.

I might have left a few things out but i think thats about it. I have had no problems with the car and it is serviced every 3000kms. Looks good and goes hard! Selling due to need of a 4x4 or ute.

May consider trade for ute or 4x4 of same or lesser value... If you are interested then call or text me on 0402522053 or email me on [email protected]

Car is located in Brisbane.

post-63635-1244339937_thumb.jpg

post-63635-1244340018_thumb.jpg

post-63635-1244340122_thumb.jpg

post-63635-1244340202_thumb.jpg

post-63635-1244340259_thumb.jpg

post-63635-1244340327_thumb.jpg

Car made 349rwhp on only 15psi and 408rwhp on 20psi. Genuine low kms and i have done the 100000km service so there is no need to worry about the hassle of changing belt and idler tensioner and stuff. Put a power fc or other computer and watch the power rise again considerably.

It is in add but a few people have asked me so the car is located in brisbane QLD and asking price is $16000 but price is negotiable. Car will not dissapoint. Once again i will consider a trade for a ute or four wheel drive.

thanks.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...