Jump to content
SAU Community

Recommended Posts

Hi, My 94 R32 GTR is having slight issues with the headlights.. Basically what is happening is if i turn the headlights on, only the drivers side comes on, this happens whether the engine is running or not.. Now if i start the engine with the headlights OFF, then switch the headlights on, again only the drivers side will turn on. BUT if i turn the ignition off, the passenger headlights turn ON!!!

At first i thought i had a loose connection, so i hard wired the left headlight in so as to bypass the suspected dodgy connection. Well that was a waste of time!

There is a fuse for the LEFT headlights, and a fuse for the RIGHT headlights. Both are fine. There is also a contactor marked headlighs, which is in my opinion the most likely culprit..

I have followed the loom right back to the fuse box and can't see any problems, so im leaning heavily towards the contactor in the engine bay fuse box.

I posted up here just to see if anyone else has had any problems remotely similar to this??

cheers,

Shaun

Link to comment
https://www.sau.com.au/forums/topic/273768-r32-gtr-strange-headlights-problem/
Share on other sites

They give lots of switch and dipper switch faults. The main switch feeds out separate left and right, which also continues thru the dipper swich. Try flicking the switch on quickly to see if both come on at the same time.

I have had a very similar problem. i spent ages looking at all the connections and switches, even using new switches, rebuilding old switches, and making new connections. In the end i gave up and just crimped a wire from the working side to the dead side and got them both running. It was originally a temporary fix until i got time to have another look but we all know how that goes!

I have had a very similar problem. i spent ages looking at all the connections and switches, even using new switches, rebuilding old switches, and making new connections. In the end i gave up and just crimped a wire from the working side to the dead side and got them both running. It was originally a temporary fix until i got time to have another look but we all know how that goes!

I had the exact same problem and used that method aswell. No time to be stripping switches n shit so just temp fixed it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...