Jump to content
SAU Community

Recommended Posts

I have a complete RB26 HKS turbo kit for sale.

KIT INCLUDES:

1. 2 x HKS 2530 Turbo - Brand New, never been used $3500 for the pair

2. 2 x HKS Actuators - Used but VGC $300

3. 2 x Stainless dumps - used but VGC $300

4. 2 x R34 GTR exh manifolds - used but VGC $400

$4200 for the lot or will split up for the prices indicated

Located in Brisbane

All offers and interest via sms please on 0402 421 437

Thanks, Trent

Link to comment
https://www.sau.com.au/forums/topic/275244-brand-new-hks-2530s/
Share on other sites

Have you got pics? as I am hunting around for some turbos. I am after some Garrett -5, but they are on backorder and I need something similar rather quickly.

Are they genuine, 100% brand spanking new? I am just after the turbos and what is price (pm me if you like)

^^^ Just do it !...you know you want to.

You have not done anything by halves so far ...why start now

( Im just real keen to see what power you can make with your combo & these turbo's)

^^^ Just do it !...you know you want to.

You have not done anything by halves so far ...why start now

( Im just real keen to see what power you can make with your combo & these turbo's)

the benchmark is 467KW at the treads under competition conditions.

go for it Matt

I don't mean to rob this thread, but do the HKS 2530s offer any perceptible advantage over the Garrett 2860-5 in real world driving conditions?

Do the 2530s spool up quicker; offer better top end power; more durable etc. than the -5s to warrant the extra premium in cost?

I heard that the HKS are harder and more expensive to obtain parts in case repair or rebuilding is required.

I am definitely tempted!

I don't mean to rob this thread, but do the HKS 2530s offer any perceptible advantage over the Garrett 2860-5 in real world driving conditions?

Do the 2530s spool up quicker; offer better top end power; more durable etc. than the -5s to warrant the extra premium in cost?

I heard that the HKS are harder and more expensive to obtain parts in case repair or rebuilding is required.

I am definitely tempted!

Matt, have PM'd you in response to preserve this for sale thread.

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...