Jump to content
SAU Community

Recommended Posts

Just making a point here...what's wrong with the good old single meet-point & a time for a cruise??? It's fair enough if a few people from the same area want to meet up to head to the cruise together & discuss it in the thread, but separate meet-points for the same cruise? Never seen it done like this....

Just making a point here...what's wrong with the good old single meet-point & a time for a cruise??? It's fair enough if a few people from the same area want to meet up to head to the cruise together & discuss it in the thread, but separate meet-points for the same cruise? Never seen it done like this....

Then you haven't been on a particular e-tuned club cruise then.

Then you haven't been on a particular e-tuned club cruise then.

Yeah eTuned do heaps of this don't they?

N.O.R. meets mean that whever runs from there will pretty much spend their entire night just driving along the freeway man. That, and the dudes who come from way north quite often end up making their own meet points prior to the cruise anyway.

Hope that helps =]

Ok, quick note; there's apparently the "ryding dirty cruise" that night as well, meeting at Citywest. They're meeting at 8:30, leaving 9:30, since we're starting later, and to avoid confusion, if they're inside - we'll take outside, if they're outside - we'll take inside.

Make sense? Open to suggestions here.

New thread to clear this all up (Thanks Rhys)

Cruise for friday night, as in tomorrow =]

Meet;

N.O.R.

Citywest carpark, 9pm meet, 9:30 depart

S.O.R.

Leach Hwy McDonalds, Mellville, 9pm meet, 9:30

Have fun,

Tim

BTW Tim, who's in charge with the S.O.R. meet point?

Tim, it's done and organized. Just leave it as it is. Too late to change anything.

Everyone meeting NoR, look out for Tim's blue R33 with gold vynals down the side, and I'll have my silver R33 there as well. Rydin' Dirty is a Ford club (I think. Bogan V8s anyway) so just look for all the Skylines/imports and come park with us.

SoR people, park with Tobin, white R33 with blue [LULZORS] plates. Again, look for all the imports.

And Tim, just have a single meet point next time, it's much easier that way.

damn, cruises are always on when im alredy doing something.

-just for people that dont know, if u wanna 'cruise' go on this one, if u wanna see LOTS and LOTS of skids4thekids then take the rydin dirrty one.

Supras love it sideways! I know mine does :P

If you know how to drive your car and know it's limits, then nothing is 'too' dangerous.

too risky for me hehe number of high powered cars all tailing each other in the wet hehe didnt want to risk it and no my supra prefers the freeway hehe not sideways

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...