Jump to content
SAU Community

Recommended Posts

i have a 25/30 up for sale it's a stock rb30 bottom end with a vvt 25 head on it it has the oil mod done and runs a commetic gasket and new water pump and timing belt... asking $2500 neg... throw me a offer i might just say yes.... contact me on 0419653518....

wrong section sorry... can a mod move it please..

Edited by jba05
Link to comment
https://www.sau.com.au/forums/topic/276861-2530-for-sale/
Share on other sites

Was anything done to the bottom end before bolting the head on.....

New bearings ????....Rings????

How many k's on the rb30?

What were the bores like??

+1

More info please.

Manifolds? Waterpump? Pulleys? etc

Link to comment
https://www.sau.com.au/forums/topic/276861-2530-for-sale/#findComment-4690210
Share on other sites

nothing done to the bottom end...

no new bearings, or rings

done 180.000, to 200,000 kays

and the bores were in top shape not a bit of movement and still see the hone marks on all 6 cylinders.

it has the intake manifold and a stock rb25 exhaust manifold.. had a brand new waterpump on it and a cometic head gasket, and new timing belt as well... no pulleys, got balancer on it as well...

Link to comment
https://www.sau.com.au/forums/topic/276861-2530-for-sale/#findComment-4690994
Share on other sites

got no pic atm computer crashed and lost all i had on here but will have some more by the weekend.. and no i'm near plainlands 30 mins before tbar.....

thanks pm pics when you can

Link to comment
https://www.sau.com.au/forums/topic/276861-2530-for-sale/#findComment-4702092
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...