Jump to content
SAU Community

Recommended Posts

hey guys iv got a small oil leak in my rb20det, it appears to be coming from the turbo side at the back, heres a pic;

post-38932-1246281332_thumb.jpg

the area i have circled is the highest point that oil appears to have built up, it then runs down the side, there is also some oil built up behind the engine(where the arrow points)

can anyone help me determine where this leak could possibly be and if so how i would go about fixing it?

Link to comment
https://www.sau.com.au/forums/topic/277006-oil-leakneed-some-help/
Share on other sites

ive got the exact same leak too on my 33. had the gasket replaced by one workshop but there was still signs of leakage. had it double checked cleaned and tightened again by another workshop but it came back. my suspicions are its the oil line that goes into the block directly under and when there's air turbulence in the bay(ie driving) it throws the oil around. I can see the nice pool of oil down below infront of your gbox, mine looks exactly the same. I have yet to properly double check my hunch with a mech so i dunno but when i had it up on the hoist for a quick road worthy the guy came to the same conclusion.

ive got the exact same leak too on my 33. had the gasket replaced by one workshop but there was still signs of leakage. had it double checked cleaned and tightened again by another workshop but it came back. my suspicions are its the oil line that goes into the block directly under and when there's air turbulence in the bay(ie driving) it throws the oil around. I can see the nice pool of oil down below infront of your gbox, mine looks exactly the same. I have yet to properly double check my hunch with a mech so i dunno but when i had it up on the hoist for a quick road worthy the guy came to the same conclusion.

are you referring to the oil line that runs from the block to the turbo? i replaced my gasket this morning and so far so good but ill keep an eye on it over the next few weeks.

  • 1 year later...

I have a similar problem. Except mine is towards the front of the engine. It doesn't seem to effect the performance of tje car at all and the oil pressure doesn't appear out of the ordinary. I'll check the rocker gasket and see. Hopefully that's all it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also seen this as an option 
    • I get you, we’ll see I’m aiming for 200ish kw now and hopefully 300rwkw down the line after some upgrades maybe like headstuds, E85 flex fuel etc  so trying to make it final for that now, I can get a GTT airbox for $280 so it’s not too bad but not sure if there’s better ways to spend that money. I seen online they say pod filter which isn’t enclosed isn’t good especially for a plus T.      hard to say what to do
    • Meh. How much power can you make from a +T anyway? I wouldn't have though it would be enough to challenge the airbox. It's not as if it's tiny compared with the turbo one. As to putting a pod in a stock airbox .... it's not the filter element that would be restrictive. It would be the air inlet to the box that would be the narrow point, which you could open up regardless of what element was inside. On my R32 I opened up the sort of triangular opening in the bottom front corner of the box, deformed (heated, moulded) some 4" stormwater pipe to fit to that opening and punched a 4" hole down through the inner guard to the spot where the stock intercooler used to be. This was purely in the search for a cold intake, but you could do something similar if you need to open up the inlet side of it. The AFM tube size is the same for both NA and turbo, so the outlet from the airbox is same same anyway. If you're going to do the right thing, then an aftermarket ECU won't care about the AFM (ie, you can get rid of it). But even if it was still there, people pull >300rwkW through them all day, and I suspect you won't be going there.
    • R34 RB25de Neo by the way ^ 
    • Doing a +T on my car and I’ve read the precious forums lots of mixed reviews from sometime back.  checking if anyone has any ideas for airbox or enclosed pod filter or solutions?  I was thinking stock GTT box but some say it’s restrictive? I seen some people try fit in a pod in the box anyone done that recently?  not any good enclosed options ? Thanks 
×
×
  • Create New...