Jump to content
SAU Community

FS: Bov, TurboTimer, Subs, 17"Mags, Stock Headunit, Racing Pedals, Stock Wing

boostimports
 Share

Recommended Posts

boostimports Community Regular

boostimports

Posted
Posted

Turbo XS Type 2 BOV with adaptor off a Skyline - $170

Manual HKS Turbo Timer – With 3 Settings of one, three and five minutes - $90

Nissan Skyline R33 Series One Wing- CARTON OF BEER

JL 12" 1000watt in Box (uncarpeted) - $250

Brand New Monza Racing Pedals - $35

17" Mags with near new tyres (4 stud) - $699

Stock R33 Headunit - Tape Player and Tuner (untouched since from japan) - $50

PM or email [email protected] if u r serious and want the pictures ... please no time wasters :(

boostimports Community Regular

boostimports

Posted
  • Author
Posted

I'm in Brisbane, Australia however I'll ship anywhere -will COD on demand.

As for the bov - its pretty darn loud and i'm pretty sure its good

"The Type H is designed for turbocharged engines running 10 psi or higher boost. however, when properly installed and adjusted, there is no limit to the maximum boost pressure these units can hold."

also comes with an adaptor i had to buy serperately to fit my skyline

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
    • WMDC35
      Wheel Sizes & Offsets For Skylines

      By WMDC35 · Posted

      A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
×
×
  • Create New...