Jump to content
SAU Community

2nd Hand Coils, Afm And Ignitor Wanted

captinsane

By captinsane,
in Queensland

 Share

Recommended Posts

captinsane Community Regular

captinsane

Posted
Posted

I have an overfuelling issue. Actually I've had it for a while but have been super lazy... it could be a number of things so I'm loking for any 2nd hand items to help diagnose my problem. These items are for a S1 Stagea, so items need to match R33 S2 RB25DET

AFM standard type

(not interested in VG30 or Tomei types as they require voltage correction for 3-5v and I don't plan on going over 250kw anyway)

Coils and ignitor (specifically for S2 RB25DET)

I might buy these if they are well priced, otherwise I'll just get some splitfires.

Boost guage (so i can make sure mine is reading correctly as I bought a cheapo a while ago)

Boost controller (EOI really... any type you might have spare. My bleed valve type has a rooted spring, I don't want to go back to stock boost and a good Electronic boost kit costs a grand which at the moment is a bit out of my range)

I'll use these items for some troubleshooting to see if I can put my finger on the problem. If it solves the problem I'll buy them off you. If they are cheap enough I'll buy them off you on the spot without troubleshooting with it. I'm not chasing aftermarket stuff, I'm not shooting for more power, I just want it to run properly without cutting out at 4pound and missing like a machine gun.

I'm located on the Northside of Brisbane.

Hope someone can help out.

Thanks in advance.

Chris

captinsane Community Regular

captinsane

Posted
  • Author
Posted

Didn't want to give the wrong impression. I want to trouble shoot by using someone else's spare parts and if they fix the problem... THEN I want to buy...

I don't want someone looking for a sale getting upset if i'm not throwing money their way straight up.

The priority is on getting some assistance, not on EOI or WTB. A sale may or may not follow afterwards.

stenve Proficient

stenve

Posted
Posted

hey mate, i have a set of s2 standard coilpacks that have been siliconed up sitting here you are welcome to borrow.

also have 2 turbosmart boost t's here

if you time it right you might be able to borrow my afm as my car has been in a crash so im not driving it atm, but it will be going for repair/getting written off probably by the end of the week. so might be hard

i also have a boost guage but its still in the car. cant be f**ked removing it sorry. haha

im on the southside of bris (browns plains)

youd need to pick them up cos my car has been crashed obviously and only have lend of the gf's mums car occasionally.

steve

captinsane Community Regular

captinsane

Posted
  • Author
Posted

Hey steve. Thanks heaps for your help. I'd love to come round and give that stuff a go if the offer is still up for grabs. I should have checked here more regularly. Can you PM me ur contact details? A replacement bosot t would be great too... :cool:

sorry to hear about your car too btw :)

53XYN

thanks for the offer. I'll try these S2 replacements first and see if I can dig up anything on using R34 coils on a 33s2, but I'm a bit hesitant because JJR replacement coils and splitfires specify a different part number for R33 S1, S1.5/2, late S2 and R34 replacement coils, so I assume that there is a difference.

hey mate, i have a set of s2 standard coilpacks that have been siliconed up sitting here you are welcome to borrow.

also have 2 turbosmart boost t's here

if you time it right you might be able to borrow my afm as my car has been in a crash so im not driving it atm, but it will be going for repair/getting written off probably by the end of the week. so might be hard

i also have a boost guage but its still in the car. cant be f**ked removing it sorry. haha

im on the southside of bris (browns plains)

youd need to pick them up cos my car has been crashed obviously and only have lend of the gf's mums car occasionally.

steve

  • 2 weeks later...
captinsane Community Regular

captinsane

Posted
  • Author
Posted

Still chasing an AFM...

PART NUMBER: 22680-31U00

R33 series 1 and 2 GTsT generally, and early Model R34 GTT up to build date 9910 (October 1999) should carry this AFM serial number.

Cheers in advance...

  • 2 weeks later...
captinsane Community Regular

captinsane

Posted
  • Author
Posted

thanks to everyone who helped out.. I ahve a replacement AFM... I'll be doing troubleshooting with it on Thursday... I also have coils and MS-IBC. THanks heaps for everyone's assistance. I'll let open this thread back up if i still need your help... thanks a bunch

peace

AlexR34 Proficient

AlexR34

Posted
Posted
I have an overfuelling issue. Actually I've had it for a while but have been super lazy... it could be a number of things so I'm loking for any 2nd hand items to help diagnose my problem. These items are for a S1 Stagea, so items need to match R33 S2 RB25DET

AFM standard type

(not interested in VG30 or Tomei types as they require voltage correction for 3-5v and I don't plan on going over 250kw anyway)

Coils and ignitor (specifically for S2 RB25DET)

I might buy these if they are well priced, otherwise I'll just get some splitfires.

Boost guage (so i can make sure mine is reading correctly as I bought a cheapo a while ago)

Boost controller (EOI really... any type you might have spare. My bleed valve type has a rooted spring, I don't want to go back to stock boost and a good Electronic boost kit costs a grand which at the moment is a bit out of my range)

I'll use these items for some troubleshooting to see if I can put my finger on the problem. If it solves the problem I'll buy them off you. If they are cheap enough I'll buy them off you on the spot without troubleshooting with it. I'm not chasing aftermarket stuff, I'm not shooting for more power, I just want it to run properly without cutting out at 4pound and missing like a machine gun.

I'm located on the Northside of Brisbane.

Hope someone can help out.

Thanks in advance.

Chris

I have 6 coils from my 34 GTS, I replaced them with splitfire ones because one was dying. I don't know which one, but the rest should be fine, I'm not even 100% sure that one was dying it was just a theory so I replaced them. $75 for all 6 if you want them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...