Jump to content
SAU Community

Recommended Posts

Was having a look an Ebay and found this!

http://cgi.ebay.com.au/nissan-350Z-brand-n...%3A3%7C294%3A50

Brand new 5SPD auto for a 350z. So I ducked into the garage and checked my build plate and both my 350GT and 300GT use the same RE5R05A auto transmission as listed above.

Would be useful for anyone with an auto thats on its way out or maybe even replace the CVTs. I paid 5K to rebuild my auto GB in my previous Bluebird...so 1.5K for a brand new one is pretty cheap.

Note: I'm not the seller...I'm even tempted to buy it just as a spare but its located in Melb and seller wants pick up only. :D

Link to comment
https://www.sau.com.au/forums/topic/279920-anyone-need-a-new-5spd-auto/
Share on other sites

Guys

Note there are different 5 speed autos, this is a 2005 model, with tcm inside the box. Earlier models have the tcm in the passenger kick pannel. Think you will find they are all RE5R05A.

Edited by CeffyNSW
Guys

Note there are different 5 speed autos, this is a 2005 model, with tcm inside the box. Earlier models have the tcm in the passenger kick pannel. Think you will find they are all RE5R05A.

Thanks for the headsup ceffy. So how do we tell which one we have? I've got an 01 and also 04.5 (series 2). How did you tell which model is being advertised?

If you look at the box being advertised you can see there are no wires coming out of it and you might be abble to see it has a connector. Thus the 05 model.

Earlier models have wires coming out of the box.

Edited by CeffyNSW

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...