Jump to content
SAU Community

Recommended Posts

intake air temps would be worth talking about rather then the "BRAND" but im guessing many of you dont check that.. with back to back testing the garret cores seem to word really really well over the cheaper coolers look into airtake temps

True, but im sure people are going to go buy an intercooler, find that the intake temps arent that much better, then buy another one.

Nor do many people have access to each individual FMIC to do the test.

And as far as i have seen on this forum, the people that do pre and post intercooler temp readings are far and few between

if its stock boost, then keep the standard intercooler

the issue isn't ambient temperature but how the car is driven and loaded up

if you go for a trash run and load it up flat out the standard core will become heatsoaked

that is, its full of heat and any air coming through it, won't experience a good temperature drop (or worse than before)

and because its a smaller core, in the side of the car it will take considerably longer for the heat to be extracted

so as you continue to load the ass out of it, the intake charge will be mega hot and the intercooler effieicny will be very poor

if you did this with a larger front mounted core the core would remain cold on the outlet side at all times

as the core is larger and its able to extract the heat easier and there is way more surface area and its directly in front

if its stock boost it would be fine

next time you go for a trash run

stop the car

get out

feel the intercooler

one side should be hot hot hot

one side should be cold cold cold

if its efficient it will be like that

if its inefficient, ie heatsoaked, both will be hot hot hot

Mine got overwhelming heat soak with an R34 SMIC. They dont get enough airflow for any real periods of hard driving. But all the comments are correct.

It will be fine at stock boost levels. A gauge is only an investment cosmetically untill you up the boost ;) I only ever splashed out on mine because i thought i was getting a lot of boost creep. And i was.. so it was an investment on my part (turbo wise :( )

If you start track racing or drags, you will find the SMIC in-effective.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...